| Author | Topic |
|---|
Location:
Brisbane
Registered:
February 2003
|
|
Re: 1uz on microtech miss
|
Sat, 08 January 2005 06:41
 
|
 |
if you're flooring it (WoT) during the run to redline, then engine should be rich - even a narrowband O2 sensor will tell you that.
if the fuel pump is off, then it will be lean above the stumble point?
i'd suggest another run monitoring AFR (even if it's just narrowband)? can you get it to plot basic timing and any retard/advance that the ECU is applying to the base timing map?
you had timing issues previously? or was that due to wiring issues from the initial installation?
cheers, charles.
|
|
|
| | Subject | Poster | Date |
|---|
 |
1uz on microtech miss
|
CrUZsida | Thu, 06 January 2005 02:14 |
|
Re: 1uz on microtech miss
|
..J.. | Thu, 06 January 2005 05:08 |
|
Re: 1uz on microtech miss
|
CrUZsida | Thu, 06 January 2005 05:13 |
|
Re: 1uz on microtech miss
|
Skip | Thu, 06 January 2005 08:26 |
|
Re: 1uz on microtech miss
|
CrUZsida | Thu, 06 January 2005 08:28 |
|
Re: 1uz on microtech miss
|
CrUZsida | Thu, 06 January 2005 08:32 |
|
Re: 1uz on microtech miss
|
CrUZsida | Fri, 07 January 2005 00:32 |
|
Re: 1uz on microtech miss
|
Skip | Fri, 07 January 2005 01:37 |
|
Re: 1uz on microtech miss
|
CrUZsida | Fri, 07 January 2005 11:03 |
|
Re: 1uz on microtech miss
|
CrUZsida | Sat, 08 January 2005 03:43 |
|
Re: 1uz on microtech miss
|
Skip | Sat, 08 January 2005 05:48 |
|
Re: 1uz on microtech miss
|
CrUZsida | Sat, 08 January 2005 05:53 |
|
Re: 1uz on microtech miss
|
thechuckster | Sat, 08 January 2005 06:09 |
|
Re: 1uz on microtech miss
|
CrUZsida | Sat, 08 January 2005 06:12 |
|
Re: 1uz on microtech miss
|
thechuckster | Sat, 08 January 2005 06:41 |
|
Re: 1uz on microtech miss
|
CrUZsida | Sat, 08 January 2005 06:52 |
|
Re: 1uz on microtech miss
|
CrUZsida | Sat, 07 May 2005 05:13 |
|
Re: 1uz on microtech miss
|
takai | Sat, 07 May 2005 07:11 |
