F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » replacing 6a-f with 4a-ge Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
SW20R Forums Junkie I supported Toymods Location: Sydney Registered: May 2002	Re: replacing 6a-f with 4a-ge Sat, 01 June 2002 13:02 [quote ] myself or should get someone else to do it? [/quote] if you think you can do it.. then save some money and go for it if you take it to a workshop they would quote you about 1.5k-2k just for labour + about $250 for efi fuel tank + extras so if you reckon you could pull the old apart and have tools or can borrow tools.. you'll save a whole lot.. so whenever your stuck you can just ring a mobile techy to fix you up. Quote: whether the current gearbox (which is sweet as still) will mate and handle the load well enough? when you get the engine it gerneraly comes with the gearbox on it.. Quote: how hard it is to make the wiring loom? hard.. if you dont know what your doing.. you'll need the right books and diagrams.. its better to buy the loom right from the wreckers (if not given with the engine) things you'll need *engine looms *chassis loom this will get you running Quote: whether any probs going from carby engine to efi one? not if you get it setup right the fuel tank should be replaced to an efi one.. which would be an easier bet.. unless your comfortable doing with an aftermarket pump.. with the conversion i did.. the old carby tank went.. efi tank took its place.. checked the back seat found a plug allready for her Quote: don't really have alot of time on my hands so can't afford to have the car off the road for ages. like i said workshops would generaly take between 3-6+weeks if your comfortable with it.. and have all parts ready you should be able todo it over 2 weekends hope this helps mate! [Report message to a moderator]

	Subject	Poster	Date
	replacing 6a-f with 4a-ge	partyjase	Sat, 01 June 2002 07:28
	Re: replacing 6a-f with 4a-ge	SW20R	Sat, 01 June 2002 13:02
	Re: replacing 6a-f with 4a-ge	partyjase	Sun, 02 June 2002 07:00
	Re: replacing 6a-f with 4a-ge	SW20R	Sun, 02 June 2002 10:39
	Re: replacing 6a-f with 4a-ge	partyjase	Sun, 02 June 2002 11:53
	Re: replacing 6a-f with 4a-ge	SW20R	Sun, 02 June 2002 12:21
	Re: replacing 6a-f with 4a-ge	justcallmefrank	Sun, 02 June 2002 12:24
	Re: replacing 6a-f with 4a-ge	SW20R	Sun, 02 June 2002 12:27
	Re: replacing 6a-f with 4a-ge	strutto	Sun, 02 June 2002 12:44
	Re: replacing 6a-f with 4a-ge	SW20R	Sun, 02 June 2002 12:48
	Re: replacing 6a-f with 4a-ge	partyjase	Sun, 02 June 2002 12:49
	Re: replacing 6a-f with 4a-ge	SW20R	Sun, 02 June 2002 12:53
	Re: replacing 6a-f with 4a-ge	partyjase	Sun, 02 June 2002 12:57
	Re: replacing 6a-f with 4a-ge	SW20R	Sun, 02 June 2002 13:01
	Re: replacing 6a-f with 4a-ge	partyjase	Sun, 02 June 2002 13:16

Previous Topic:	1J Comp Ratio
Next Topic:	What would be better to put in?? 7MGE or 1GGTE??

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.