F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Rack & Pinion toe settings, camber added Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
demuire Forums Junkie Location: Ipswich Registered: May 2002	Re: Rack & Pinion toe settings, camber added Mon, 10 January 2005 23:00 Yes, I had issues with the control arms scraping my rotors (without RCA's!), I ground the lip of the control arm off a bit and flattened the rest with a hammer, and also shaved the hubs a little so that the discs sat further away from the control arms. And of course, shaved the calipers appropriately to still stay centered. All of that overlooked by an engineer and approved of course. Unfortunately this means a lot of wheels don't fit on my car anymore because the calipers stick too far out from the hub... As for wheel alignment, you can do a temp one by straightening the wheels as best you can and putting a tape measure in front and behind the wheel and trying to get it as even as you can. Then, drive to your local wheel alignment shop and get them to do it properly [Report message to a moderator]

	Subject	Poster	Date
	Rack & Pinion toe settings, camber added	ae86slaver	Mon, 10 January 2005 22:54
	Re: Rack & Pinion toe settings, camber added	demuire	Mon, 10 January 2005 23:00
	Re: Rack & Pinion toe settings, camber added	ae86slaver	Mon, 10 January 2005 23:10
	Re: Rack & Pinion toe settings, camber added	demuire	Mon, 10 January 2005 23:19
	Re: Rack & Pinion toe settings, camber added	TurboRA28	Mon, 10 January 2005 23:32
	Re: Rack & Pinion toe settings, camber added	ae86slaver	Mon, 10 January 2005 23:46
	Re: Rack & Pinion toe settings, camber added	TurboRA28	Mon, 10 January 2005 23:58
	Re: Rack & Pinion toe settings, camber added	demuire	Mon, 10 January 2005 23:58
	Re: Rack & Pinion toe settings, camber added	ae86slaver	Tue, 11 January 2005 00:03
	Re: Rack & Pinion toe settings, camber added	TurboRA28	Tue, 11 January 2005 00:06
	Re: Rack & Pinion toe settings, camber added	demuire	Tue, 11 January 2005 00:08
	Re: Rack & Pinion toe settings, camber added	ae86slaver	Tue, 11 January 2005 00:23
	Re: Rack & Pinion toe settings, camber added	demuire	Tue, 11 January 2005 00:58
	Re: Rack & Pinion toe settings, camber added	ae86slaver	Tue, 11 January 2005 02:19
	Re: Rack & Pinion toe settings, camber added	demuire	Tue, 11 January 2005 02:35
	Re: Rack & Pinion toe settings, camber added	ae86slaver	Tue, 11 January 2005 22:53
	Re: Rack & Pinion toe settings, camber added	demuire	Tue, 11 January 2005 23:03
	Re: Rack & Pinion toe settings, camber added	TurboRA28	Tue, 11 January 2005 23:41
	Re: Rack & Pinion toe settings, camber added	ae86slaver	Tue, 11 January 2005 23:47
	Re: Rack & Pinion toe settings, camber added	TurboRA28	Wed, 12 January 2005 00:01
	Re: Rack & Pinion toe settings, camber added	demuire	Wed, 12 January 2005 00:41

Previous Topic:	some advise will go down well (ra 65 hints)
Next Topic:	commore v6 in to hachi

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.