F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Rack & Pinion toe settings, camber added Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
ae86slaver Forums Junkie Registered: February 2003	Re: Rack & Pinion toe settings, camber added Tue, 11 January 2005 22:53 ok dudes, the car is back on road, and what a difference there is - both good and bad. The good. -Front is about 15mm-20mm lower, in turn leveling out the car as it was sitting abit higher than the back before. -Turn in very good, resulting from excessive (too much atm) toe out -Bump steer feels better from RCA's -Looks hot The bad. - Rubbing on guards excessively (even driving straight!) on corners it scrubs hard - Steering is WAAAAY too light (feels like power steering ) - No control of direction (if i don't hold the wheel, the car will just either go left, or go right) - Steering has not much response - feels loose and delayed I measured up the toe out and there is about 35mm difference - giving about 17.5mm toe out on each side (but left side seems to have more) so this would explain the unpredictable steering of either going left or right. But what i want to know is, how did everyone find their RCA's when first installed? If it is going to make my steering so light then i much prefer the old setting, hard and stiff. [Report message to a moderator]

	Subject	Poster	Date
	Rack & Pinion toe settings, camber added	ae86slaver	Mon, 10 January 2005 22:54
	Re: Rack & Pinion toe settings, camber added	demuire	Mon, 10 January 2005 23:00
	Re: Rack & Pinion toe settings, camber added	ae86slaver	Mon, 10 January 2005 23:10
	Re: Rack & Pinion toe settings, camber added	demuire	Mon, 10 January 2005 23:19
	Re: Rack & Pinion toe settings, camber added	TurboRA28	Mon, 10 January 2005 23:32
	Re: Rack & Pinion toe settings, camber added	ae86slaver	Mon, 10 January 2005 23:46
	Re: Rack & Pinion toe settings, camber added	TurboRA28	Mon, 10 January 2005 23:58
	Re: Rack & Pinion toe settings, camber added	demuire	Mon, 10 January 2005 23:58
	Re: Rack & Pinion toe settings, camber added	ae86slaver	Tue, 11 January 2005 00:03
	Re: Rack & Pinion toe settings, camber added	TurboRA28	Tue, 11 January 2005 00:06
	Re: Rack & Pinion toe settings, camber added	demuire	Tue, 11 January 2005 00:08
	Re: Rack & Pinion toe settings, camber added	ae86slaver	Tue, 11 January 2005 00:23
	Re: Rack & Pinion toe settings, camber added	demuire	Tue, 11 January 2005 00:58
	Re: Rack & Pinion toe settings, camber added	ae86slaver	Tue, 11 January 2005 02:19
	Re: Rack & Pinion toe settings, camber added	demuire	Tue, 11 January 2005 02:35
	Re: Rack & Pinion toe settings, camber added	ae86slaver	Tue, 11 January 2005 22:53
	Re: Rack & Pinion toe settings, camber added	demuire	Tue, 11 January 2005 23:03
	Re: Rack & Pinion toe settings, camber added	TurboRA28	Tue, 11 January 2005 23:41
	Re: Rack & Pinion toe settings, camber added	ae86slaver	Tue, 11 January 2005 23:47
	Re: Rack & Pinion toe settings, camber added	TurboRA28	Wed, 12 January 2005 00:01
	Re: Rack & Pinion toe settings, camber added	demuire	Wed, 12 January 2005 00:41

Previous Topic:	some advise will go down well (ra 65 hints)
Next Topic:	commore v6 in to hachi

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.