Author | Topic |
![](images/custom_avatars/6004)
I Supported Toymods
Location: south Melbourne/KL
Registered: June 2004
|
Re: intake / pod filters
|
Wed, 12 January 2005 03:23
![Go to previous message Go to previous message](http://forums.toymods.org.au/theme/default/images/up.gif)
|
![](blank.gif) |
fade-e wrote on Mon, 10 January 2005 17:54 | i have docs from the EPA in respect to this but they only state that the air intake and exhaust noise levels cannot exceed those set by them... this means that the noise levels cannot exceed
- 96dB for pre '83 vehicles
- 90dB for '83 onwards
but there is no ruling sauing that they are illegal to have... the rule is as follows
20 Repairs and modifications
A person must not cause or permit a motor vehicle’s engine, or its air intake or exhaust system, to be modified or repaired in such a manner that the maximum noise level of the motor vehicle after the repair or modification (regardless of the noise level of the motorvehicle before the repair or modification) exceeds the maximum noise level specified in Schedule 1 for that kind of motor vehicle.
Maximum penalty: 100 penalty units in the case of a corporation, 50 penalty units in the case of an individual.
so thats the law from the EPA... it comes from here
Protection of the Environment Operations (Noise Control) Regulation 2000
under the Protection of the Environment Operations Act 1997
but if anyone has any other links please let me know... also i have these files on disk but cannot upload here
|
im bad at interpreting and this one is a mind twister with all the b4 and afters. so according to this, does it mean that u can do any modifications as long as its not louder than what is permitted?
|
|
|
| Subject | Poster | Date |
![Read Message Read Message](http://forums.toymods.org.au/theme/default/images/pmsg_read.gif) |
intake / pod filters
|
fade-e | Mon, 10 January 2005 06:23 |
![Read Message Read Message](http://forums.toymods.org.au/theme/default/images/pmsg_read.gif) |
Re: intake / pod filters
|
CrUZsida | Mon, 10 January 2005 06:29 |
![Read Message Read Message](http://forums.toymods.org.au/theme/default/images/pmsg_read.gif) |
Re: intake / pod filters
|
ae95 | Mon, 10 January 2005 06:31 |
![Read Message Read Message](http://forums.toymods.org.au/theme/default/images/pmsg_read.gif) |
Re: intake / pod filters
|
86twinky | Mon, 10 January 2005 06:31 |
![Read Message Read Message](http://forums.toymods.org.au/theme/default/images/pmsg_read.gif) |
Re: intake / pod filters
|
fade-e | Mon, 10 January 2005 06:54 |
![Read Message Read Message](http://forums.toymods.org.au/theme/default/images/pmsg_read.gif) |
Re: intake / pod filters
|
b1gb3n | Wed, 12 January 2005 03:23 |
![Read Message Read Message](http://forums.toymods.org.au/theme/default/images/pmsg_read.gif) |
Re: intake / pod filters
|
Hunty | Mon, 10 January 2005 10:15 |
![Read Message Read Message](http://forums.toymods.org.au/theme/default/images/pmsg_read.gif) |
Re: intake / pod filters
|
Hunty | Tue, 11 January 2005 08:34 |
![Read Message Read Message](http://forums.toymods.org.au/theme/default/images/pmsg_read.gif) |
Re: intake / pod filters
|
4agte | Tue, 11 January 2005 09:01 |
![Read Message Read Message](http://forums.toymods.org.au/theme/default/images/pmsg_read.gif) |
Re: intake / pod filters
|
mrshin | Tue, 11 January 2005 13:58 |
![Read Message Read Message](http://forums.toymods.org.au/theme/default/images/pmsg_read.gif) |
Re: intake / pod filters
|
Celica_John | Wed, 12 January 2005 06:39 |
![Read Message Read Message](http://forums.toymods.org.au/theme/default/images/pmsg_read.gif) |
Re: intake / pod filters
|
fade-e | Wed, 12 January 2005 06:48 |
![Read Message Read Message](http://forums.toymods.org.au/theme/default/images/pmsg_read.gif) |
Re: intake / pod filters
|
Celica_John | Wed, 12 January 2005 21:11 |
![Read Message Read Message](http://forums.toymods.org.au/theme/default/images/pmsg_read.gif) |
Re: intake / pod filters
|
4agte | Wed, 12 January 2005 06:49 |
![Read Message Read Message](http://forums.toymods.org.au/theme/default/images/pmsg_read.gif) |
Re: intake / pod filters
|
90celi | Thu, 01 December 2005 06:03 |
![Read Message Read Message](http://forums.toymods.org.au/theme/default/images/pmsg_read.gif) |
Re: intake / pod filters
|
digitalpho3nix | Thu, 01 December 2005 06:07 |
![Read Message Read Message](http://forums.toymods.org.au/theme/default/images/pmsg_read.gif) |
Re: intake / pod filters
|
90celi | Thu, 01 December 2005 06:08 |
![Read Message Read Message](http://forums.toymods.org.au/theme/default/images/pmsg_read.gif) |
Re: intake / pod filters
|
Corona RT142 | Thu, 01 December 2005 06:12 |
![Read Message Read Message](http://forums.toymods.org.au/theme/default/images/pmsg_read.gif) |
Re: intake / pod filters
|
90celi | Thu, 01 December 2005 06:14 |