| Author | Topic |
|---|
Location:
Borneo - Land of the Head...
Registered:
April 2003
|
|
Re: W55 on 3S-GTE
|
Thu, 13 January 2005 09:53
 
|
 |
hi guys,
I've started the 3S-GTE(ST185) into the TA27 Project. So far, I'v managed to source out a 2C bellhousing and combined it with the W55 and it fits perfectly onto the 3S block. Now i have used the 3S flywheel, clutch cover and clutch. Ive got a spigot bearing which is 16mm wide and it fits perfectly into the crankshaft and the gearbox shaft enters about 6 - 7mm into the bearing so i didnt have to mill the bellhousing. Ive used a clutch bearing out of a 2L-3L engine and the clutch fork of the 2C bellhousing. Now my problem is the 3S-gte flywheel is not as thick as the 2C flywheel and the clutch fork does not travel as far out to reach the clutch cover. Ive adjusted the pivot on the bellhousing till the clutch fork allows the clutch bearing to reach the clutch cover. Now Im worried that since the clutch bearing is further out from the shaft, when it is engaged, it may fall off or come out of the shaft, is this gonna be an issue? or how much must the clutch fork move (in mm) to enable the clutch bearing to fully press the pressure plate. What do you guys think? any other issues that need to be pointed out for this setup that I have done? For you guys who have done this conversion before you input is very much appreaciated thanks.
Vern
http://www.geocities.com/levinboyz
|
|
|
| | Subject | Poster | Date |
|---|
 |
W55 on 3S-GTE
|
GA22GT | Mon, 29 November 2004 10:09 |
|
Re: W55 on 3S-GTE
|
thechuckster | Mon, 29 November 2004 11:05 |
|
Re: W55 on 3S-GTE
|
mrshin | Mon, 29 November 2004 11:31 |
|
Re: W55 on 3S-GTE
|
GA22GT | Tue, 30 November 2004 01:22 |
|
Re: W55 on 3S-GTE
|
ra23celica | Tue, 30 November 2004 05:35 |
|
Re: W55 on 3S-GTE
|
gabe | Tue, 30 November 2004 05:42 |
|
Re: W55 on 3S-GTE
|
GA22GT | Tue, 30 November 2004 08:52 |
|
Re: W55 on 3S-GTE
|
GA22GT | Thu, 13 January 2005 09:53 |
|
Re: W55 on 3S-GTE
|
TA22-3SGTE | Thu, 13 January 2005 13:12 |
|
Re: W55 on 3S-GTE
|
GA22GT | Fri, 14 January 2005 01:59 |
|
Re: W55 on 3S-GTE
|
rokusan | Fri, 14 January 2005 10:01 |
|
Re: W55 on 3S-GTE
|
TA22-3SGTE | Fri, 14 January 2005 12:38 |
|
Re: W55 on 3S-GTE
|
V8_MA61 | Fri, 14 January 2005 12:40 |
|
Re: W55 on 3S-GTE
|
GA22GT | Mon, 24 January 2005 01:34 |
