F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » CV joint removal Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
BabyZ Regular Location: Armidale Registered: January 2003	Re: CV joint removal Mon, 17 January 2005 08:02 It doesn't matter if it is straight or not, as it is this bit here that you are trying to whack: It is the inner part of the cage that holds the balls in place that you are trying to hit. It slips over the splined end of the shaft. Putting it back on - refit the snap ring first, then yeah, just grease it a bit and push it back on. Theoretically you buy and fit a new snap ring first, but many people seem to get away with putting the old one back on. Edited: For clarity [Updated on: Mon, 17 January 2005 08:05] [Report message to a moderator]

	Subject	Poster	Date
	CV joint removal	davedave	Sun, 16 January 2005 11:44
	Re: CV joint removal	feral4mr2	Sun, 16 January 2005 14:30
	Re: CV joint removal	BabyZ	Sun, 16 January 2005 22:49
	Re: CV joint removal	davedave	Mon, 17 January 2005 03:44
	Re: CV joint removal	BabyZ	Mon, 17 January 2005 08:02
	Re: CV joint removal	davedave	Mon, 17 January 2005 10:36
	Re: CV joint removal	davedave	Tue, 18 January 2005 22:32
	Re: CV joint removal	BabyZ	Wed, 19 January 2005 04:28
	Re: CV joint removal	davedave	Wed, 19 January 2005 04:41
	Re: CV joint removal	sik sx	Wed, 19 January 2005 06:26
	Re: CV joint removal	Joshstix	Wed, 19 January 2005 06:47

Previous Topic:	ST165 Fuel Rail on Gen1 3SGE
Next Topic:	vl fuel pump location

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.