F.A.Q.    Register    Login    Home Members    Search

Classifieds » Parts Wanted » Wanted Working SX Oil sender Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Scorpion Forums Junkie Location: Menai area of Sydney Registered: June 2003	Re: Wanted Working SX Oil sender Mon, 17 January 2005 12:07 Check the resistance of the pressure gauge with a multimeter. If it's infinite (no reading) then the gauge may need to be rewired. Also check that you have 12v in the wire to the sender when the ignition is on. Also check that there is no resistance between the body of the sender and the block - i.e. you're not using plumbing tape or similar around the thread of the sender to seal it. (this insulates the sender from the block and it needs to be earthed). [Report message to a moderator]

	Subject	Poster	Date
	Wanted Working SX Oil sender	Matt20v	Mon, 17 January 2005 07:53
	Re: Wanted Working SX Oil sender	Scorpion	Mon, 17 January 2005 12:07
	Re: Wanted Working SX Oil sender	Matt20v	Tue, 18 January 2005 02:26

Previous Topic:	WTB, 71-72 TA22 Celica taillights. "Flat lense type"
Next Topic:	AE86 handbrake cable

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.