| Author | Topic |
|---|
I Supported Toymods
Location:
Sydney
Registered:
December 2002
|
|
Re: 3SGE -> 3SGTE (ST162)
|
Sat, 22 January 2005 09:46
 
|
 |
Yep the ST185 (not the group A / CS / RC model) is the most commonly available 3SGTE front cut at the moment... and they are fairly sensibly priced too! (Low 2,000's usually)
Having said that if you can find an ST165 front cut at the right price go for it as there will be more parts you can use from the ST165.
The gearbox will be the only other major part you will need to consider... all the other bits you will need will be fairly small (bits of vacuum hose, water hose, intake pipework etc.)
Personally I would try to budget an extra $500ish for the little stuff you will need and just buy it as you go... I doubt anyone has bothered to keep a list of the smaller parts they have needed for this sort of conversion (unless you're really lucky)
If you get an ST165 front cut you probably won't need so many of the little bits and pieces.
Further to that you may want to consider just buying an ST165 outright... it would probably end up more expensive in the long run to build the ST163.5
|
|
|
| | Subject | Poster | Date |
|---|
 |
3SGE -> 3SGTE (ST162)
|
MAD180 | Fri, 21 January 2005 07:58 |
|
Re: 3SGE -> 3SGTE (ST162)
|
SilverGhost | Fri, 21 January 2005 08:28 |
|
Re: 3SGE -> 3SGTE (ST162)
|
MAD180 | Fri, 21 January 2005 09:48 |
|
Re: 3SGE -> 3SGTE (ST162)
|
Toobs | Sat, 22 January 2005 09:46 |
|
Re: 3SGE -> 3SGTE (ST162)
|
Draza | Sat, 22 January 2005 10:03 |
|
Re: 3SGE -> 3SGTE (ST162)
|
MAD180 | Sat, 22 January 2005 21:12 |
|
Re: 3SGE -> 3SGTE (ST162)
|
stark | Sun, 23 January 2005 05:37 |
|
Re: 3SGE -> 3SGTE (ST162)
|
Toobs | Sun, 23 January 2005 09:23 |
|
Re: 3SGE -> 3SGTE (ST162)
|
MAD180 | Sun, 23 January 2005 07:12 |
|
Re: 3SGE -> 3SGTE (ST162)
|
leclercqr | Sun, 23 January 2005 09:05 |
|
Re: 3SGE -> 3SGTE (ST162)
|
MAD180 | Sun, 23 January 2005 09:26 |
|
Re: 3SGE -> 3SGTE (ST162)
|
4agte | Sun, 23 January 2005 09:36 |
|
Re: 3SGE -> 3SGTE (ST162)
|
acreese | Mon, 31 January 2005 15:08 |
|
Re: 3SGE -> 3SGTE (ST162)
|
davedave | Mon, 31 January 2005 20:02 |
|
Re: 3SGE -> 3SGTE (ST162)
|
4agte | Mon, 31 January 2005 20:39 |
|
Re: 3SGE -> 3SGTE (ST162)
|
davedave | Mon, 31 January 2005 22:15 |
|
Re: 3SGE -> 3SGTE (ST162)
|
4agte | Mon, 31 January 2005 22:21 |
|
Re: 3SGE -> 3SGTE (ST162)
|
MAD180 | Sun, 23 January 2005 09:38 |
|
Re: 3SGE -> 3SGTE (ST162)
|
verbatim210 | Sat, 30 April 2005 06:39 |
