| Author | Topic |
|---|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: 1.3 4k mod help.....
|
Mon, 24 January 2005 04:55
 
|
 |
a number of people have added SC12's and SC14's to 4K and 5K's
basically you just need to add some brackets to hold the SC on the dizzy side, mod or get a twin belt pulley for the crank (or go to full ribbed belts, try 7K stuff), and then work out the intake piping and fueling..
personally i would not go the route others have taken and use a draw thru or blow thru carb.. you are MUCH better off fuel injecting it. something like 7MG injectors would be near perfect (295cc/min) to start with.
Brad M had a 5K with SC14 running it on gas... gas is by far the easiest to set up, except you need to have a gas tank and lines.. and you probably can't have an intercooler (unless you use a pressure referenced mixer as a blow thru mixer?)
for EFI manifolds, use either 4K-E or 7K-E
http://www.materials.unsw.edu.au/~sford/7ke4ke.htm l
Cya, Stewart
|
|
|
| | Subject | Poster | Date |
|---|
 |
1.3 4k mod help.....
|
OldSchoolRolla | Mon, 24 January 2005 03:35 |
|
Re: 1.3 4k mod help.....
|
hokey | Mon, 24 January 2005 03:40 |
|
Re: 1.3 4k mod help.....
|
oldcorollas | Mon, 24 January 2005 04:55 |
|
Re: 1.3 4k mod help.....
|
fester | Mon, 24 January 2005 08:39 |
|
Re: 1.3 4k mod help.....
|
oldcorollas | Mon, 24 January 2005 09:31 |
|
Re: 1.3 4k mod help.....
|
filthman | Mon, 24 January 2005 10:40 |
|
Re: 1.3 4k mod help.....
|
oldcorollas | Mon, 24 January 2005 11:05 |
|
Re: 1.3 4k mod help.....
|
bassy | Mon, 24 January 2005 10:49 |
|
Re: 1.3 4k mod help.....
|
towe_001 | Mon, 24 January 2005 11:56 |
|
Re: 1.3 4k mod help.....
|
OldSchoolRolla | Mon, 24 January 2005 23:47 |
|
Re: 1.3 4k mod help.....
|
towe_001 | Tue, 25 January 2005 02:07 |
|
Re: 1.3 4k mod help.....
|
bmak | Tue, 25 January 2005 11:50 |
|
Re: 1.3 4k mod help.....
|
oldcorollas | Wed, 26 January 2005 11:38 |
|
Re: 1.3 4k mod help.....
|
oldcorollas | Wed, 26 January 2005 11:39 |
