| Author | Topic |
|---|
Club Member
Location:
sydney
Registered:
May 2002
|
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
Wed, 26 January 2005 01:37
 
|
 |
| Quote: |
the maximum lift allowed is around the 267 degree cams. cant remember exact figure, but u can find it on club4ag website. i remember the 280 degree one had too much lift for stock springs but the dude at wade claims it would be fine
|
ok firstly, if you have no fucking idea what you are talking about then dont reply with miss-information. duration has little at all to do with the amount of lift you can use! Tell me, what lift does your so called 272 have?? is it 10mm or 7.5mm? if you cant answer that then you have no place posting something that someonelse has said without even understanding what you are saying yourself.
| Quote: |
Anybody know for certain the maximum lift possible without binding the factory springs? This may be a consideration for which cam you go for too..
|
In terms of lift the first problem will be the shims, it is generally regarded that anything above 8mm has the potential to spit shims at high rpm and therefore over that lift will firstly need a shim under bucket setup. In terms of the spring itself the easiest way is to measure the height of the sppring at full compression, add in a safety margin of say 5mm then you should be able to determine what your maximum lift will be.
Something you will have to consider is that the more lift you have the higher rating spring you will need and therefore if you need to increase the springs dia. you "may" loose some lift. generally whenever you do a bigger cam you should automatically upgrade your springs anyway, just another thing to factor in to the cost of upgrading your cams.
club4ag has some good information as does Bill Sherwoods site, a little search will give you motre information than you can probhably get you head around, some of the clubman sites have some good tech as well.
[Updated on: Thu, 27 January 2005 06:56]
|
|
|
| | Subject | Poster | Date |
|---|
 |
267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
AE82-Morg | Tue, 12 October 2004 20:59 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
TurboRA28 | Tue, 12 October 2004 23:05 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
AE82-Morg | Tue, 12 October 2004 23:20 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
Skaney | Wed, 13 October 2004 01:18 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
AE82-Morg | Wed, 13 October 2004 01:35 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
Skaney | Wed, 13 October 2004 01:55 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
AE82-Morg | Wed, 13 October 2004 02:05 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
LEVIN_86 | Wed, 13 October 2004 04:42 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
AE82-Morg | Wed, 13 October 2004 05:19 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
rxjohn | Wed, 13 October 2004 05:30 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
AE82-Morg | Wed, 13 October 2004 05:55 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
rxjohn | Wed, 13 October 2004 06:02 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
Skaney | Wed, 13 October 2004 08:37 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
b1gb3n | Wed, 13 October 2004 08:52 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
AE82-Morg | Wed, 13 October 2004 10:39 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
ae86drift | Wed, 13 October 2004 10:58 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
shinybluesteel | Wed, 13 October 2004 11:20 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
ae86drift | Wed, 13 October 2004 12:26 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
b1gb3n | Wed, 13 October 2004 13:39 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
Adam_Rolla | Sun, 17 October 2004 07:33 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
IRA11Y | Sun, 17 October 2004 07:58 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
AE82-Morg | Sun, 17 October 2004 22:14 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
Adam_Rolla | Mon, 18 October 2004 06:06 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
LEVIN_86 | Mon, 18 October 2004 06:17 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
b1gb3n | Mon, 18 October 2004 07:03 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
Adam_Rolla | Mon, 18 October 2004 07:43 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
IRA11Y | Mon, 18 October 2004 09:40 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
ae86trueno | Tue, 19 October 2004 02:27 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
Skaney | Tue, 19 October 2004 10:42 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
Necros | Thu, 27 January 2005 03:18 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
parrot | Tue, 19 October 2004 14:33 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
b1gb3n | Tue, 19 October 2004 16:45 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
monkeymajik | Tue, 19 October 2004 21:27 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
Adsport | Wed, 20 October 2004 02:12 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
b1gb3n | Wed, 20 October 2004 04:33 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
Skaney | Thu, 21 October 2004 01:47 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
AE82-Morg | Thu, 21 October 2004 02:05 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
b1gb3n | Thu, 21 October 2004 03:04 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
LEVIN GTV | Mon, 24 January 2005 16:53 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
mrshin | Tue, 25 January 2005 09:22 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
TE72_Turbo | Tue, 25 January 2005 11:35 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
b1gb3n | Tue, 25 January 2005 16:09 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
IRA11Y | Wed, 26 January 2005 01:37 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
mrshin | Tue, 25 January 2005 12:33 |
|
Re: 267 Deg Cams for my 4AGE, Wade Cams, Regarding ECU
|
TE72_Turbo | Wed, 26 January 2005 00:03 |
| Current Time:
Thu Jan 9 02:21:50 UTC 2025 |
Total time taken to generate the page: 0.018534898757935 seconds |
