| Author | Topic |
|---|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: setting up 4k
|
Sun, 30 January 2005 07:34
 
|
 |
3K block, 4K crank (have to gring out things a bit), 79mm pistons, shorter rods (or same rods but lower pin height pistons).
the 4K blocks have thinner walls than 3K, so can't be bored out as much.
for drag? my cam seems to be really good between 6000 and 8000 atm.. it's a camtech 609, ie 275/284, 231/235@50thou, 435thou lift.
any more duration and you move power band too high.
|
|
|
| | Subject | Poster | Date |
|---|
 |
setting up 4k
|
oldskulwagon | Sat, 29 January 2005 10:39 |
|
Re: setting up 4k
|
oldcorollas | Sat, 29 January 2005 13:22 |
|
Re: setting up 4k
|
oldcorollas | Sat, 29 January 2005 13:23 |
|
Re: setting up 4k
|
Toycrash | Sat, 29 January 2005 18:05 |
|
Re: setting up 4k
|
oldskulwagon | Sun, 30 January 2005 07:15 |
|
Re: setting up 4k
|
oldcorollas | Sun, 30 January 2005 07:22 |
|
Re: setting up 4k
|
oldskulwagon | Sun, 30 January 2005 07:31 |
|
Re: setting up 4k
|
oldcorollas | Sun, 30 January 2005 07:34 |
|
Re: setting up 4k
|
oldskulwagon | Mon, 31 January 2005 10:28 |
|
Re: setting up 4k
|
oldcorollas | Tue, 01 February 2005 10:53 |
|
Re: setting up 4k
|
Redwarf | Tue, 01 February 2005 11:54 |
