Toymods Car Club Inc: Tech & Conversions => TA22: Electronically Assisted Ignition

Toymods Car Club
www.toymods.org.au

F.A.Q.

Home

Members

Toymods » Tech & Conversions » TA22: Electronically Assisted Ignition Show: Today's Posts :: Show Polls Email to friend

Author

Topic

floppy
Regular

Location:
Ipswich
Registered:
January 2004

Re: TA22: Electronically Assisted Ignition

Mon, 31 January 2005 03:27

alex_ta22 wrote on Fri, 28 January 2005 16:11

direct bolt up, i think u can use the coil you already got

Ahh ok, cool, I will keep an eye out for one.

Meanwhile I put the kit that my friend had made up for the escort into the TA22, seems quite good. the spark on cylinder 1 was visibly brighter when the kit was in the on position. (although i had just cleaned and set the points before I did this kit.) Previously I checked the spark with the points before I cleaned it, so It may have been that too.)

Anyway what I did do is check the voltage going to the points when the kit is set to On, around 7-8v (slight fluctuation), when the kit is off it was reading 12V.

It did seem to be a bit more responsive when driving, (less hesitation on putting the foot down), but then that could just be the placebo effect too, me wanting it to feel smoother Smile

Thanks for all the info guys, got some more ammunition to play around with now.

Floppy

[Report message to a moderator]

[Message index]

-=] Back to Top [=-

Current Time: Sat Jul 26 23:48:51 UTC 2025

Total time taken to generate the page: 0.0048148632049561 seconds

.:: Contact :: Home ::.