the motor came from japan in a soarer half cut, its got a td06 strapped to the side of it and the 2 injectors are welded into the pipe with 3000 written on it going across the top of the motor. Im not sure about the pressure regulator or whats been done to it but its got some serious camms in it and all the injectors are upgraded. The computer is not an f-con but some ancient monstrosity called a "ribik" or something...
so u think the signal should be from the ecu not coil...ok that helps a bit and yeah...no wiring diagrams anywhere
ill have another look over the motor today and see what else is changed and ill try to hook up the piggy back....i dont suppose u know what wire from ecu sends the signal for the injectors?
Mon, 07 February 2005 02:57
