F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 18RG Conversion Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
willwal98 Regular Location: Toowoomba Registered: May 2002	Re: 18RG Conversion Fri, 15 November 2002 03:30 I think he meant he put an EFI 18r-g in and used a cable instead of a linkage which some people choose to do with the stock solexes. I can take a photo of my linkage setup this arvo, it was just a quick job but it's been on there for about 2 years now and still going strong. Just get a bosch gt40r coil, stocker 18r-c one would most likely do the job. I used a stock 18r-c distributor in mine for quite some time and it works fine. Everything below the head should be re-usable, don't forget you need to get a different set of extractors and also I think I had to get different radiator hoses, maybe I just swapped them over . Thermostat housing is different but thermostat itself is the same. Good luck with the conversion. [Updated on: Fri, 15 November 2002 03:35] [Report message to a moderator]

	Subject	Poster	Date
	18RG Conversion	RA28midge	Thu, 14 November 2002 04:00
	Re: 18RG Conversion	RA23_Sean	Thu, 14 November 2002 08:54
	Re: 18RG Conversion	THE WITZL	Fri, 15 November 2002 02:44
	Re: 18RG Conversion	blackRA28	Fri, 15 November 2002 03:12
	Re: 18RG Conversion	Shteeve	Fri, 15 November 2002 03:29
	Re: 18RG Conversion	RA23_Sean	Fri, 15 November 2002 23:55
	Re: 18RG Conversion	willwal98	Fri, 15 November 2002 03:30
	Re: 18RG Conversion	munki	Fri, 15 November 2002 07:41
	Re: 18RG Conversion	pilot	Fri, 01 August 2003 05:24
	Re: 18RG Conversion	THE WITZL	Fri, 15 November 2002 07:48
	Re: 18RG Conversion	willwal98	Sat, 16 November 2002 00:25
	Re: 18RG Conversion	RA28midge	Sun, 17 November 2002 22:40
	Re: 18RG Conversion	Steve M	Mon, 23 June 2003 02:46
	Re: 18RG Conversion	Steve M	Mon, 23 June 2003 02:49

Previous Topic:	1uz-fe "ticking" (shims need adjusting ?, where to get done ?)
Next Topic:	Gearbox leaks x3

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.