| Author | Topic |
|---|
Location:
Perth
Registered:
June 2002
|
|
Re: Gauges
|
Wed, 09 February 2005 12:34
 
|
 |
Just on the topic of gauges, being an instrument/electrical fitter by trade, when I got my 30psi Autometer boost gauge, I had to check the calibration on it. I was amazed to find it reading 3 pound out at full scale. The error varied up and down scale, so repeatability was an issue.
I returned it and got another. Same again (not as bad this time).
This continued with a few other gauges, different makes too. I finally settled on a VDO number, accurate to .2 psi. Pretty good I thought, so yeah, as far as I can tell, VDO are the most accurate and don't look too shabby either!
Cheers
Gabe
|
|
|
| | Subject | Poster | Date |
|---|
 |
Gauges
|
Cool1 | Sat, 05 February 2005 02:28 |
|
Re: Gauges
|
ZZT231 | Sat, 05 February 2005 02:44 |
|
Re: Gauges
|
Stefan | Sun, 06 February 2005 11:12 |
|
Re: Gauges
|
people100 | Sun, 06 February 2005 08:48 |
|
Re: Gauges
|
styler | Mon, 07 February 2005 07:14 |
|
Re: Gauges
|
styler | Mon, 07 February 2005 07:31 |
|
Re: Gauges
|
Lucid | Mon, 07 February 2005 07:34 |
|
Re: Gauges
|
riceburna73 | Mon, 07 February 2005 13:26 |
|
Re: Gauges
|
Cool1 | Mon, 07 February 2005 13:30 |
|
Re: Gauges
|
oldcorollas | Wed, 09 February 2005 10:02 |
|
Re: Gauges
|
draven | Wed, 09 February 2005 10:04 |
|
Re: Gauges
|
riceburna73 | Thu, 10 February 2005 02:47 |
|
Re: Gauges
|
bassy | Wed, 09 February 2005 10:44 |
|
Re: Gauges
|
gabe | Wed, 09 February 2005 12:34 |
|
Re: Gauges
|
Stefan | Wed, 09 February 2005 12:42 |
|
Re: Gauges
|
draven | Thu, 10 February 2005 23:53 |
|
Re: Gauges
|
monkeymajik | Wed, 09 February 2005 15:23 |
