| Author | Topic |
|---|
Location:
Toowoomba
Registered:
May 2002
|
|
Re: 18RG Conversion
|
Sat, 16 November 2002 00:25
 
|
 |
my most humble apposlagies, i forgot all about this wqhen I got home. Here are two pics showing the mods you need to do for a linkage setup. The leg that travels down to the carbies I could not get a proper shot of where it links to the carbs but I put a drawing in to show that bit. And I have put adjustment holes towards the top of this bit too. Hope this helps you. BTW where the pivot it towards the middle there are bolt holes already there so no drilling reguired.
Please ignore all the dodgy bits (like the blue AND yellow paint) most of these I plan to fix over the next few months.
|
|
|
| | Subject | Poster | Date |
|---|
 |
18RG Conversion
|
RA28midge | Thu, 14 November 2002 04:00 |
|
Re: 18RG Conversion
|
RA23_Sean | Thu, 14 November 2002 08:54 |
|
Re: 18RG Conversion
|
THE WITZL | Fri, 15 November 2002 02:44 |
|
Re: 18RG Conversion
|
blackRA28 | Fri, 15 November 2002 03:12 |
|
Re: 18RG Conversion
|
Shteeve | Fri, 15 November 2002 03:29 |
|
Re: 18RG Conversion
|
RA23_Sean | Fri, 15 November 2002 23:55 |
|
Re: 18RG Conversion
|
willwal98 | Fri, 15 November 2002 03:30 |
|
Re: 18RG Conversion
|
munki | Fri, 15 November 2002 07:41 |
|
Re: 18RG Conversion
|
pilot | Fri, 01 August 2003 05:24 |
|
Re: 18RG Conversion
|
THE WITZL | Fri, 15 November 2002 07:48 |
|
Re: 18RG Conversion
|
willwal98 | Sat, 16 November 2002 00:25 |
|
Re: 18RG Conversion
|
RA28midge | Sun, 17 November 2002 22:40 |
|
Re: 18RG Conversion
|
Steve M | Mon, 23 June 2003 02:46 |
|
Re: 18RG Conversion
|
Steve M | Mon, 23 June 2003 02:49 |
