| Author | Topic |
|---|
Location:
NSW
Registered:
August 2003
|
|
Re: SW20 Coolant Burping
|
Sun, 13 February 2005 11:43
 
|
 |
I found the engine drain plug and went through draining it all over again.
Replaced an o ring on the radiator bleeder (as every time i turned it 3 turns per the BGB it would start to leak), this made no difference, still leaks.
Tried to get the thermostat out but could only get to one bolt, so was unable to.
Still won't take in enough coolant, idles high, and i can always hear it bubbling after a drive.
Now when i try to burp it, coolant keeps coming out of radiator bleed hose, with no coolant in the heater bleeder, which is a new occurence.
If only i could cancel out the thermostat, just can't get to the 2nd bolt.
I am so annoyed, i want to get someone else to have a look at it, can anyone suggest someone in Sydney that knows about SW20 MR2 specific coolant technique? I used to love driving it, but now i've pulled my car off the road so i don't do any damage.
|
|
|
| | Subject | Poster | Date |
|---|
 |
SW20 Coolant Burping
|
DamMR2T | Sun, 02 January 2005 12:22 |
|
Re: SW20 Coolant Burping
|
warrior | Sun, 02 January 2005 12:30 |
|
Re: SW20 Coolant Burping
|
feral4mr2 | Sun, 02 January 2005 12:31 |
|
Re: SW20 Coolant Burping
|
Alchemist | Sun, 02 January 2005 13:30 |
|
Re: SW20 Coolant Burping
|
Aust162 | Sun, 02 January 2005 13:58 |
|
Re: SW20 Coolant Burping
|
toof | Sun, 02 January 2005 23:55 |
|
Re: SW20 Coolant Burping
|
DamMR2T | Mon, 03 January 2005 10:37 |
|
Re: SW20 Coolant Burping
|
DamMR2T | Wed, 05 January 2005 02:13 |
|
Re: SW20 Coolant Burping
|
DamMR2T | Sun, 13 February 2005 11:43 |
|
Re: SW20 Coolant Burping
|
Toobs | Sun, 13 February 2005 11:59 |
