F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Ln106/XT130/PUG604 Issues Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
fade-e Forums Junkie Location: Sydney Registered: June 2004	Re: Ln106/XT130/PUG604 Issues Mon, 14 February 2005 02:13 with my final upgrade im gonna have to get 15s... for the time beig im gonna just get stock MX73 wheels which cruzzida said fits just right. im not sure what the camber is going to be like just yet cause i havent finished it but i have already organised longer wheel studs. the studs im getting are 78mm long compared to the stock ones of 40.2mm... but a hacksaw can fix that in a jiffy with the calipers i havent weighed them but they do feel alot more than 5kg. more to the 8kg joel is saying but that is an estimation as i have only held them iv estimated 5kg extra per caliper and also 5kg extra for the strut and rotor assembly... so im guessing shouldnt be more than 20kg heavier. bit like you said joel the braking capacity will be 10x better at least my final upgrade will be as follows: - ST205 GT4 brake master cylinder (15/16 bore) - adjustable proportioning valve in the engine bay (will be covered for engineering purposes) - MX73 struts and hubs (struts shortened 1" and seat swapped to maintain original parts of the TA22, hub machined down to get under rotor) - stock TA22 steering knuckle redrilled (elongated) to fit MX73 strut - Z32 slotted rotors redrilled to 4 stud 114.3PCD - Z32 4pot calipers - stock rear end (10" drums) so thats my upgrade in a nut shell. total cost is approx $1200. this includes hub machining, redrilling rotors, new hub bearings and new brake lines [Report message to a moderator]

	Subject	Poster	Date
	Ln106/XT130/PUG604 Issues	MarioM	Sat, 12 February 2005 06:41
	Re: Ln106/XT130/PUG604 Issues	cambelt	Sat, 12 February 2005 14:10
	Re: Ln106/XT130/PUG604 Issues	MarioM	Sun, 13 February 2005 09:23
	Re: Ln106/XT130/PUG604 Issues	EVOSTi	Sun, 13 February 2005 09:39
	Re: Ln106/XT130/PUG604 Issues	MarioM	Sun, 13 February 2005 09:41
	Re: Ln106/XT130/PUG604 Issues	EVOSTi	Sun, 13 February 2005 09:48
	Re: Ln106/XT130/PUG604 Issues	MarioM	Sun, 13 February 2005 09:55
	Re: Ln106/XT130/PUG604 Issues	EVOSTi	Sun, 13 February 2005 09:58
	Re: Ln106/XT130/PUG604 Issues	takai	Sun, 13 February 2005 12:13
	Re: Ln106/XT130/PUG604 Issues	ra23celica	Sun, 13 February 2005 12:57
	Re: Ln106/XT130/PUG604 Issues	13BTA22	Mon, 14 February 2005 00:23
	Re: Ln106/XT130/PUG604 Issues	fade-e	Mon, 14 February 2005 00:39
	Re: Ln106/XT130/PUG604 Issues	takai	Mon, 14 February 2005 00:39
	Re: Ln106/XT130/PUG604 Issues	TurboRA28	Mon, 14 February 2005 00:42
	Re: Ln106/XT130/PUG604 Issues	fade-e	Mon, 14 February 2005 00:51
	Re: Ln106/XT130/PUG604 Issues	EvilJack	Mon, 14 February 2005 00:46
	Re: Ln106/XT130/PUG604 Issues	takai	Mon, 14 February 2005 00:55
	Re: Ln106/XT130/PUG604 Issues	TurboRA28	Mon, 14 February 2005 01:02
	Re: Ln106/XT130/PUG604 Issues	fade-e	Mon, 14 February 2005 02:13
	Re: Ln106/XT130/PUG604 Issues	MarioM	Mon, 14 February 2005 06:38

Previous Topic:	4agte ke20 conversion
Next Topic:	Aftermarket ECU's for 20 valve N/A (silvertop)

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.