| Author | Topic |
|---|
Location:
townsville NQLD
Registered:
February 2004
|
|
Re: Anyone intrested...18r-c aircon, Fitted to 18r-g using original 18r-c brackets?
|
Mon, 14 February 2005 10:48
|
 |
hi,
these are the problems i see with it
1. in my opinion, those brackets will not quiet be adaquete support for the aircon considering the HP drain it puts on the motor and the amount of stress which is put on it when it cuts in.
2.u might want to use 2 bolts into the head (modify r-c bracket) because that alloy might crack after a while
3.if the diameter of the inside of the water pump pulley (alternator one) is too different to the diameter of the face where the a/c pulley rubs on, they will spin at different speeds and they will 'fight' (the alternator one will win).
other than that, great work similar to mine.
1 question for you; how did u get the hose to reach from the aircon to the condensor (radiator for a/c).
here is my setup, u might to think about a pulley like what i made, 15minutes work maximum 
brett
|
|
|
| | Subject | Poster | Date |
|---|
 |
Anyone intrested...18r-c aircon, Fitted to 18r-g using original 18r-c brackets?
|
rx793 | Sun, 13 February 2005 12:46 |
|
Re: Anyone intrested...18r-c aircon, Fitted to 18r-g using original 18r-c brackets?
|
rx793 | Sun, 13 February 2005 12:51 |
|
Re: Anyone intrested...18r-c aircon, Fitted to 18r-g using original 18r-c brackets?
|
rx793 | Sun, 13 February 2005 12:54 |
|
Re: Anyone intrested...18r-c aircon, Fitted to 18r-g using original 18r-c brackets?
|
THE WITZL | Sun, 13 February 2005 13:03 |
|
Re: Anyone intrested...18r-c aircon, Fitted to 18r-g using original 18r-c brackets?
|
rx793 | Sun, 13 February 2005 13:09 |
|
Re: Anyone intrested...18r-c aircon, Fitted to 18r-g using original 18r-c brackets?
|
Ra28Freak | Sun, 13 February 2005 23:52 |
|
Re: Anyone intrested...18r-c aircon, Fitted to 18r-g using original 18r-c brackets?
|
Azrael | Mon, 14 February 2005 05:40 |
|
Re: Anyone intrested...18r-c aircon, Fitted to 18r-g using original 18r-c brackets?
|
jeffro RA28 | Mon, 14 February 2005 07:15 |
|
Re: Anyone intrested...18r-c aircon, Fitted to 18r-g using original 18r-c brackets?
|
rx793 | Mon, 14 February 2005 08:09 |
|
Re: Anyone intrested...18r-c aircon, Fitted to 18r-g using original 18r-c brackets?
|
rx793 | Mon, 14 February 2005 08:10 |
|
Re: Anyone intrested...18r-c aircon, Fitted to 18r-g using original 18r-c brackets?
|
rx793 | Mon, 14 February 2005 08:17 |
|
Re: Anyone intrested...18r-c aircon, Fitted to 18r-g using original 18r-c brackets?
|
Allan | Mon, 14 February 2005 08:31 |
|
Re: Anyone intrested...18r-c aircon, Fitted to 18r-g using original 18r-c brackets?
|
jeffro RA28 | Mon, 14 February 2005 08:32 |
|
Re: Anyone intrested...18r-c aircon, Fitted to 18r-g using original 18r-c brackets?
|
Allan | Mon, 14 February 2005 08:34 |
|
Re: Anyone intrested...18r-c aircon, Fitted to 18r-g using original 18r-c brackets?
|
Allan | Mon, 14 February 2005 08:48 |
|
Re: Anyone intrested...18r-c aircon, Fitted to 18r-g using original 18r-c brackets?
|
brett_celicacoupe | Mon, 14 February 2005 10:48 |
