| Author | Topic |
|---|
Toymods Vice President
Location:
Sydney
Registered:
May 2002
|
|
Re: time has come mr2 power up
|
Mon, 14 February 2005 23:16
 
|
 |
No idea about Gen 1 gear but the Gen 2 and Gen 3 have different intake cams. The intake cam on the Gen3 has about 8 degrees more duration than the intake on the Gen2. They both run the same exhaust cam.
The Gen3 head also allows higher lift cams than the Gen2 head without modification. As well as the fact that the Gen 2 has shim over valve actuation, high lift cams actually hit the head casting in the Gen2 where they do not in the Gen3.
|
|
|
| | Subject | Poster | Date |
|---|
 |
time has come mr2 power up
|
Hunty | Sat, 12 February 2005 06:20 |
|
Re: time has come mr2 power up
|
Joshstix | Sat, 12 February 2005 07:18 |
|
Re: time has come mr2 power up
|
turbocaldina | Mon, 14 February 2005 09:16 |
|
Re: time has come mr2 power up
|
Joshstix | Mon, 14 February 2005 21:57 |
|
Re: time has come mr2 power up
|
TurboRA28 | Mon, 14 February 2005 22:15 |
|
Re: time has come mr2 power up
|
Joshstix | Mon, 14 February 2005 23:16 |
|
Re: time has come mr2 power up
|
Hunty | Tue, 15 February 2005 01:37 |
|
Re: time has come mr2 power up
|
Toobs | Tue, 15 February 2005 02:50 |
|
Re: time has come mr2 power up
|
Joshstix | Tue, 15 February 2005 02:51 |
|
Re: time has come mr2 power up
|
Hunty | Tue, 15 February 2005 03:18 |
