| Author | Topic |
|---|
I supported Toymods
Location:
Sydney
Registered:
August 2002
|
|
Re: mx83 brake upgrade
|
Wed, 16 February 2005 06:31
 
|
 |
Robert -
YOU DO NOT NEED TO GET ANY CUSTOM PLATES MADE UP. THEY BOLT STRAIGHT UP. we answered this for you on www.toyotacressida.com 
any decent machine shop can make the locator rings..
you just need to tell them the "OD" (Outside Diameter) of the Hub (which is 60mm), and the "ID" Inside Diameter of the new rotor (which is 71.5mm for the BA Falcon)
So, what you end up with is a ring that has an ID of 60mm and an OD of 71.5mm
If you like, I am getting mine made up shortly, I will let you know the price and if you send me the $$$, I will get two extra made up...
|
|
|
| | Subject | Poster | Date |
|---|
 |
mx83 brake upgrade
|
i2obert | Tue, 15 February 2005 10:26 |
|
Re: mx83 brake upgrade
|
Norbie | Tue, 15 February 2005 12:07 |
|
Re: mx83 brake upgrade
|
mrshin | Tue, 15 February 2005 12:43 |
|
Re: mx83 brake upgrade
|
Allan | Tue, 15 February 2005 12:51 |
|
Re: mx83 brake upgrade
|
i2obert | Tue, 15 February 2005 20:11 |
|
Re: mx83 brake upgrade
|
Southo | Wed, 16 February 2005 06:31 |
|
Re: mx83 brake upgrade
|
i2obert | Wed, 16 February 2005 07:03 |
|
Re: mx83 brake upgrade
|
Norbie | Wed, 16 February 2005 13:42 |
|
Re: mx83 brake upgrade
|
gianttomato | Wed, 16 February 2005 21:42 |
|
Re: mx83 brake upgrade
|
Norbie | Thu, 17 February 2005 01:52 |
|
Re: mx83 brake upgrade
|
i2obert | Thu, 17 February 2005 07:31 |
|
Re: mx83 brake upgrade
|
TheStitt | Thu, 17 February 2005 09:56 |
|
Re: mx83 brake upgrade
|
mrshin | Fri, 18 February 2005 14:27 |
|
Re: mx83 brake upgrade
|
DigitalAE86 | Fri, 18 February 2005 23:00 |
|
Re: mx83 brake upgrade
|
Norbie | Sat, 19 February 2005 02:24 |
|
Re: mx83 brake upgrade
|
mrshin | Sat, 19 February 2005 10:45 |
|
Re: mx83 brake upgrade
|
Norbie | Sat, 19 February 2005 11:13 |
