| Author | Topic |
|---|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
Re: 1JZGTE in 82 soarer what to do?
|
Thu, 17 February 2005 05:10
 
|
 |
| nemesis2187 wrote on Thu, 17 February 2005 13:05 |
What is going to be needed to make this conversion work e.g. do i need mounts to be made up or can i use another toyota's mounts to sit the engine in right and the same for the autobox crossmember, will i need a brake upgrade, will the diff hold will the tailshaft need to be cut and shut and what sump would i have to use mid, rear or front and where can i get a suitable half cut for the conversion at a mad price etc etc.
any reliable and accurate information is greatly appreciated
thanx
Ivan.
|
Called Bonneville Automotive in NSW, they have off the shelf mounts to bolt a 1JZGTE into the Soarer. This will sit it in the right position for the gearbox, so you shouldn't have to change the tailshaft, unless you get an R154. You'll need a front sump, as for price, do some ringing.
|
|
|
