Toymods Car Club Inc: Tech & Conversions => Brake conversion on ra40's...Is this TRUE?

Toymods Car Club
www.toymods.org.au

F.A.Q.

Home

Members

Toymods » Tech & Conversions » Brake conversion on ra40's...Is this TRUE? Show: Today's Posts :: Show Polls Email to friend

Author

Topic

rx793
Forums Junkie

Location:
Perth, Western Australia
Registered:
June 2003

Brake conversion on ra40's...Is this TRUE?

Tue, 22 February 2005 15:34

This is from the toymods article...Is it true aobut hte silhouette? also...is it true the the RT141 whole diff bolts straight up...no mods? someone set me straight....

Quote:

So from the beginning hunt up a complete RT 141 rear diff assembly including hand brake cables (which is very important). This gives you a 23 spline BW diff which is about the same strength as your celica/corona diff - if you have a RA40 or AE86 just swap the whole diff assembly over. I am not sure about the hand brake cables for the 40/86 but everything else should work out. Another thing that I have not really investigated, but if you have a 40 or 86 you may be able to make use of an Australian Nissen Skyline Silhouette. These come with a 4 pinion 28 spline BW LSD (like a VL turbo but stronger as the VL is only 2 pinion). The whole assembly is exactly the same width as the RT141 ? you never know your luck in a big city - it all just may fit. Of course the other option is look at fitting the whole Skyline assembly, which I will be planning to do to my 23 in the future. As I seem to be breaking diffs, would like a lsd and I currently use 25mm spaces because of the offset of the wheels that I have so the additional width of the Skyline diff would be great..

[Report message to a moderator]

[Message index]

-=] Back to Top [=-

Current Time: Sat Feb 8 06:26:25 UTC 2025

Total time taken to generate the page: 0.0066530704498291 seconds

.:: Contact :: Home ::.