F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » corona mark 2 diff FAQ; with pics *update* photos of my jig Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
brett_celicacoupe Forums Junkie Location: townsville NQLD Registered: February 2004	corona mark 2 diff FAQ; with pics *update* photos of my jig Wed, 23 February 2005 07:29 this is a corona mark 2 (MX13 - MX23) diff FAQ; with pics these diffs are a suitable swap for a early Celica ie. RA28 or RA40 stc. and probly other early RWD cars too. The reason I write this is because before I bought my mkII diff, I knew none of this stuff and had to PM people to get answers. hopefuly I can help some people by posting up this info and pics. ......i was sick of reading through endless threads to find hard facts/ info the corona mark 2 diff can be found in a MX13 - MX23 corona mk II, be sure to check the build plate that it is actually a "F" series diff (code will be something like F302 or something) these diffs share the same centre as a MA61 supra and are available for them specifications axle: 27 spline width: 1410 mm wide, hub face to hub face stud pattern: 4 x 114.3 PCD. (same as Celica) ratio: will have a look soon differences to ra40 diff the differences I have found between the mkII diff and the Celica diff are; -top trailing arms are spaced further apart than the Celica ones. About 7.5mm wider on each side with rough tape measure measurements. -the mkII diff has the coil spring seat on the trailing arm (see pic) wheras the Celica has the seat on the diff itself - the bottom trailing arm bracket is wider and totally different so it has to come off In general, to swap this into a Celica you will have to swap the 2 lower and 2 upper trailing arms brackets with the Celica ones. Just by *looking *, it seems that the panhard rod mount on the diff will be suitable for the Celica. Tailshaft: if you grab the mkII tailshaft you will have a perfect tailshaft , mkII flanged on one end and the other end to suit a W40/W50.......not quiet, from my observations the tailshaft will need to be shortened by around 2 inches or so. If anybody wants more measurements or photos just ask here are the pics; corona diff if anybody has anything to add...add it brett [Updated on: Sun, 27 March 2005 10:16] [Report message to a moderator]

	Subject	Poster	Date
	corona mark 2 diff FAQ; with pics *update* photos of my jig	brett_celicacoupe	Wed, 23 February 2005 07:29
	Re: corona mark 2 diff FAQ; with pics	gianttomato	Wed, 23 February 2005 07:36
	Re: corona mark 2 diff FAQ; with pics	brett_celicacoupe	Wed, 23 February 2005 10:56
	Re: corona mark 2 diff FAQ; with pics	Allan	Wed, 23 February 2005 11:56
	Re: corona mark 2 diff FAQ; with pics	brett_celicacoupe	Wed, 23 February 2005 12:12
	Re: corona mark 2 diff FAQ; with pics	improvedae86	Wed, 23 February 2005 12:08
	Re: corona mark 2 diff FAQ; with pics	Norbie	Wed, 23 February 2005 08:55
	Re: corona mark 2 diff FAQ; with pics	Lambolica	Wed, 23 February 2005 09:05
	Re: corona mark 2 diff FAQ; with pics	TE72_Turbo	Wed, 23 February 2005 11:45
	Re: corona mark 2 diff FAQ; with pics	Norbie	Wed, 23 February 2005 12:41
	Re: corona mark 2 diff FAQ; with pics	V8_MA61	Wed, 23 February 2005 13:03
	Re: corona mark 2 diff FAQ; with pics	brett_celicacoupe	Thu, 24 February 2005 10:52
	Re: corona mark 2 diff FAQ; with pics	gold28	Fri, 25 February 2005 02:09
	Re: corona mark 2 diff FAQ; with pics	gianttomato	Fri, 25 February 2005 03:12
	Re: corona mark 2 diff FAQ; with pics	improvedae86	Sat, 26 February 2005 10:45
	Re: corona mark 2 diff FAQ; with pics	brett_celicacoupe	Sat, 26 February 2005 11:24
	Re: corona mark 2 diff FAQ; with pics	boudan	Sat, 26 February 2005 12:58
	Re: corona mark 2 diff FAQ; with pics	TE72_Turbo	Fri, 25 February 2005 07:06
	Re: corona mark 2 diff FAQ; with pics	gold28	Fri, 25 February 2005 03:30
	Re: corona mark 2 diff FAQ; with pics	brett_celicacoupe	Fri, 25 February 2005 09:45
	Re: corona mark 2 diff FAQ; with pics	TA-022	Fri, 25 February 2005 23:39
	Re: corona mark 2 diff FAQ; with pics	boudan	Sat, 26 February 2005 10:19
	Re: corona mark 2 diff FAQ; with pics	Allan	Sat, 26 February 2005 10:38
	Re: corona mark 2 diff FAQ; with pics	Norbie	Sat, 26 February 2005 13:02
	Re: corona mark 2 diff FAQ; with pics	brett_celicacoupe	Sat, 26 February 2005 13:21
	Re: corona mark 2 diff FAQ; with pics	boudan	Sat, 26 February 2005 13:50
	Re: corona mark 2 diff FAQ; with pics	TA-022	Sat, 26 February 2005 22:56
	Re: corona mark 2 diff FAQ; with pics	brett_celicacoupe	Wed, 02 March 2005 03:21
	Re: corona mark 2 diff FAQ; with pics	TE72_Turbo	Wed, 02 March 2005 06:19
	Re: corona mark 2 diff FAQ; with pics	brett_celicacoupe	Wed, 02 March 2005 08:32
	Re: corona mark 2 diff FAQ; with pics	brett_celicacoupe	Sun, 13 March 2005 06:30
	Re: corona mark 2 diff FAQ; with pics *update* new pics and specs	brett_celicacoupe	Sun, 13 March 2005 07:21
	Re: corona mark 2 diff FAQ; with pics *update* new pics and specs	THE WITZL	Sun, 13 March 2005 08:21
	Re: corona mark 2 diff FAQ; with pics *update* new pics and specs	gianttomato	Sun, 13 March 2005 08:25
	Re: corona mark 2 diff FAQ; with pics *update* new pics and specs	brett_celicacoupe	Sun, 13 March 2005 11:41
	Re: corona mark 2 diff FAQ; with pics *update* new pics and specs	THE WITZL	Sun, 13 March 2005 08:30
	Re: corona mark 2 diff FAQ; with pics *update* new pics and specs	TurboRA28	Sun, 13 March 2005 08:41
	Re: corona mark 2 diff FAQ; with pics *update* new pics and specs	gold28	Sun, 13 March 2005 23:17
	Re: corona mark 2 diff FAQ; with pics *update* new pics and specs	brett_celicacoupe	Mon, 14 March 2005 09:44
	Re: corona mark 2 diff FAQ; with pics *update* new pics and specs	gold28	Mon, 14 March 2005 22:41
	Re: corona mark 2 diff FAQ; with pics *update* new pics and specs	gold28	Wed, 16 March 2005 08:40
	Re: corona mark 2 diff FAQ; with pics *update* new pics and specs	brett_celicacoupe	Wed, 16 March 2005 11:48
	Re: corona mark 2 diff FAQ; with pics *update* photos of my jig	brett_celicacoupe	Sun, 27 March 2005 10:39
	Re: corona mark 2 diff FAQ; with pics *update* photos of my jig	gold28	Mon, 28 March 2005 03:12
	Re: corona mark 2 diff FAQ; with pics *update* photos of my jig	brett_celicacoupe	Mon, 28 March 2005 07:54
	Re: corona mark 2 diff FAQ; with pics *update* photos of my jig	gold28	Mon, 28 March 2005 09:51
	Re: corona mark 2 diff FAQ; with pics *update* photos of my jig	brett_celicacoupe	Mon, 28 March 2005 10:07
	Re: corona mark 2 diff FAQ; with pics *update* photos of my jig	gold28	Mon, 28 March 2005 21:33
	Re: corona mark 2 diff FAQ; with pics *update* photos of my jig	brett_celicacoupe	Wed, 03 August 2005 11:12
	Re: corona mark 2 diff FAQ; with pics *update* photos of my jig	brett_celicacoupe	Fri, 05 August 2005 10:09
	Re: corona mark 2 diff FAQ; with pics *update* photos of my jig	gold28	Fri, 19 August 2005 03:23
	Re: corona mark 2 diff FAQ; with pics *update* photos of my jig	brett_celicacoupe	Sun, 21 August 2005 03:18

Previous Topic:	head gaskets and engine rebuild
Next Topic:	20v gze?

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.