| Author | Topic |
|---|
Location:
Bunbury, W.A.
Registered:
January 2005
|
|
Re: Lipped disc rotor
|
Wed, 23 February 2005 13:46
|
 |
|
I machine rotors at Repco, but depends on how far they are worn. There is a minimum thickness on every rotor, you can't go any lower than that. If it is past that then it is time for some new rotors. Sometimes they havethe minimum thickness stamped on the disc somewhere, but I'm also not sure how slotteds will go. I've never had to do one.
|
|
|
| | Subject | Poster | Date |
|---|
 |
Lipped disc rotor
|
Shraka | Wed, 23 February 2005 10:02 |
|
Re: Lipped disc rotor
|
Cool1 | Wed, 23 February 2005 10:17 |
|
Re: Lipped disc rotor
|
berad | Wed, 23 February 2005 10:18 |
|
Re: Lipped disc rotor
|
Shraka | Wed, 23 February 2005 10:18 |
|
Re: Lipped disc rotor
|
Benjamin | Wed, 23 February 2005 10:27 |
|
Re: Lipped disc rotor
|
Nolan | Wed, 23 February 2005 10:34 |
|
Re: Lipped disc rotor
|
Shraka | Wed, 23 February 2005 11:13 |
|
Re: Lipped disc rotor
|
Cool1 | Wed, 23 February 2005 11:14 |
|
Re: Lipped disc rotor
|
Shraka | Wed, 23 February 2005 12:05 |
|
Re: Lipped disc rotor
|
Cool1 | Wed, 23 February 2005 12:07 |
|
Re: Lipped disc rotor
|
4agte | Wed, 23 February 2005 12:43 |
|
Re: Lipped disc rotor
|
Shraka | Wed, 23 February 2005 12:48 |
|
Re: Lipped disc rotor
|
4agte | Wed, 23 February 2005 13:10 |
|
Re: Lipped disc rotor
|
mz21_shiznac | Wed, 23 February 2005 13:46 |
