| Author | Topic |
|---|
Location:
Canberra
Registered:
May 2002
|
|
Re: W58 shifter position in AE86
|
Fri, 25 February 2005 07:29
 
|
 |
Of the four positions available, I found the most forward one (RA65 etc) to be the best, it sat 1" further forward than the T50 stick, but has a fair rearwards angle on the actual shifter, so falls to hand nicely. It "just" clears the front of the shifter hole without any cutting.
The next position back would be absolutely perfect, but I couldn't find one over a 6 month period. Had two freighted to me that were both wrong.
The second from the back position (GA/MA70) can be fitted, but requires about 15mm to be cut from the hole in the floor, and the shifter to be straightened, otherwise it feels too close to the handbrake.
Don't even consider the furthest back position 
What are you using for a gearbox crossmember?
Cheers 
Phil
[Updated on: Fri, 25 February 2005 07:43]
|
|
|
| | Subject | Poster | Date |
|---|
 |
W58 shifter position in AE86
|
Rex_Kelway | Fri, 25 February 2005 05:44 |
|
Re: W58 shifter position in AE86
|
TE72_Turbo | Fri, 25 February 2005 07:29 |
|
Re: W58 shifter position in AE86
|
Rex_Kelway | Fri, 25 February 2005 07:42 |
|
Re: W58 shifter position in AE86
|
CrUZsida | Fri, 25 February 2005 08:07 |
|
Re: W58 shifter position in AE86
|
CrUZsida | Fri, 25 February 2005 07:31 |
|
Re: W58 shifter position in AE86
|
TE72_Turbo | Fri, 25 February 2005 07:38 |
|
Re: W58 shifter position in AE86
|
CrUZsida | Fri, 25 February 2005 07:33 |
|
Re: W58 shifter position in AE86
|
CrUZsida | Fri, 25 February 2005 07:36 |
|
Re: W58 shifter position in AE86
|
Cool1 | Fri, 25 February 2005 07:53 |
|
Re: W58 shifter position in AE86
|
CrUZsida | Fri, 25 February 2005 07:58 |
|
Re: W58 shifter position in AE86
|
Cool1 | Fri, 25 February 2005 08:02 |
|
Re: W58 shifter position in AE86
|
Rex_Kelway | Fri, 25 February 2005 08:35 |
|
Re: W58 shifter position in AE86
|
CrUZsida | Fri, 25 February 2005 08:05 |
|
Re: W58 shifter position in AE86
|
Cool1 | Fri, 25 February 2005 08:09 |
|
Re: W58 shifter position in AE86
|
CrUZsida | Fri, 25 February 2005 08:10 |
|
Re: W58 shifter position in AE86
|
Cool1 | Fri, 25 February 2005 08:15 |
|
Re: W58 shifter position in AE86
|
CrUZsida | Fri, 25 February 2005 08:24 |
|
Re: W58 shifter position in AE86
|
Cool1 | Fri, 25 February 2005 08:28 |
|
Re: W58 shifter position in AE86
|
CrUZsida | Fri, 25 February 2005 08:31 |
|
Re: W58 shifter position in AE86
|
Cool1 | Fri, 25 February 2005 08:32 |
