| Author | Topic |
|---|
Location:
Bundaberg, Qld.
Registered:
May 2002
|
|
Re: harmonic balancer on 4agze, can i use 4age one.
|
Thu, 21 November 2002 11:21
 
|
 |
 yeah, the crank pulley's are swapable from ge to ze to 20v.....
*A/C pulley offsets....**i had the same trouble...
it is not the crank pulley that makes the a/c pulley offset, the ze a/c compressor pulley is a different offset compared to a ge one, not the crank.
the problem if that a ze a/c mount has no tensioner, but a ge one does...
if you put the alternator where the s/c was (like me, so you can tighten the water pump belt)..
you need to use the ge a/c mount as it has it's own belt tensioner, but then you also need a ge a/c compressor for the pulley's to line up....
|
|
|
| | Subject | Poster | Date |
|---|
 |
harmonic balancer on 4agze, can i use 4age one.
|
barbel | Wed, 20 November 2002 02:13 |
|
Re: harmonic balancer on 4agze, can i use 4age one.
|
DAMO | Wed, 20 November 2002 09:15 |
|
Re: harmonic balancer on 4agze, can i use 4age one.
|
feral4mr2 | Thu, 21 November 2002 11:21 |
|
Re: harmonic balancer on 4agze, can i use 4age one.
|
barbel | Fri, 22 November 2002 03:02 |
|
Re: harmonic balancer on 4agze, can i use 4age one.
|
feral4mr2 | Fri, 22 November 2002 09:47 |
|
Re: harmonic balancer on 4agze, can i use 4age one.
|
DAMO | Fri, 22 November 2002 21:28 |
|
Re: harmonic balancer on 4agze, can i use 4age one.
|
LadySX | Sun, 24 November 2002 02:19 |
|
Re: harmonic balancer on 4agze, can i use 4age one.
|
MYT-16V | Thu, 05 December 2002 13:02 |
