| Author | Topic |
|---|
Location:
MACKAY
Registered:
May 2002
|
|
Re: TA22-3SGTE DYNO UPDATE
|
Mon, 03 June 2002 12:15
 
|
 |
I will post a Dyno Graph as soon as I get my scanner working .
Ok as to not misslead anyone else , My motor is a ST165 which I rebuilt myself , it is all stock internals with gapless rings ( total seal full race set)standard bearings , standard headgasket , I reconditioned the head and cleaned up the ports and chambers a little also port matched the intake and exhaust manifolds , cams are stock , plenum is made from 3" thickwall aluminium tube with about 90mm runners , I needed to make this as to fit in the TA22 , I made the exhaust manifold out of 1 1/4" steam pipe and have a 3" dump down to a 2 1/2" mandral bent exhaust system , Air cleaner is 3" pod sealed up in front of L/H wheel with cold air pickup , Air to Air intercooler from ST185 ,
I fitted another set of ST165 injectors under the manifold close to the ports as to squirt straight on to the valve heads , These injectors are conected to a seperate fuel system ( Metanol ) which I stage in after about 10 PSI boost which increases the octane level allowing me to increase ignition timing far more than using fuel alone ( 39 degrees advance at 5000 RPM on 23 PSI Boost ) The Methanol squirting directly into the port also helps keep the combustion chambers cooler , Engine Management is HALTECH E6S . Any one need any more info please ask .
Trevor.
|
|
|
| | Subject | Poster | Date |
|---|
 |
TA22-3SGTE DYNO UPDATE
|
TA22-3SGTE | Fri, 31 May 2002 11:56 |
|
Re: TA22-3SGTE DYNO UPDATE
|
TE72_Turbo | Sat, 01 June 2002 09:34 |
|
Re: TA22-3SGTE DYNO UPDATE
|
TA22-3SGTE | Sat, 01 June 2002 09:56 |
|
Re: TA22-3SGTE DYNO UPDATE
|
[mikey] | Sun, 02 June 2002 08:41 |
|
Re: TA22-3SGTE DYNO UPDATE
|
| Sun, 02 June 2002 08:46 |
|
Re: TA22-3SGTE DYNO UPDATE
|
[mikey] | Sun, 02 June 2002 08:52 |
|
Re: TA22-3SGTE DYNO UPDATE
|
Puffy | Sun, 02 June 2002 09:52 |
|
Re: TA22-3SGTE DYNO UPDATE
|
TA22-3SGTE | Mon, 03 June 2002 12:15 |
|
Re: TA22-3SGTE DYNO UPDATE
|
thetoyman75 | Tue, 04 June 2002 11:21 |
|
Re: TA22-3SGTE DYNO UPDATE
|
draven | Wed, 05 June 2002 04:01 |
|
Re: TA22-3SGTE DYNO UPDATE
|
justcallmefrank | Wed, 05 June 2002 04:19 |
|
Re: TA22-3SGTE DYNO UPDATE
|
TA22-3SGTE | Sat, 08 June 2002 11:59 |
|
Re: TA22-3SGTE DYNO UPDATE
|
Cool1 | Sat, 08 June 2002 12:33 |
|
Re: TA22-3SGTE DYNO UPDATE
|
Cool1 | Sat, 08 June 2002 12:51 |
|
Re: TA22-3SGTE DYNO UPDATE
|
wilbo666 | Sat, 08 June 2002 22:54 |
|
Re: TA22-3SGTE DYNO UPDATE
|
| Sun, 09 June 2002 01:05 |
|
Re: TA22-3SGTE DYNO UPDATE
|
draven | Sun, 09 June 2002 02:37 |
|
Re: TA22-3SGTE DYNO UPDATE
|
TE72_Turbo | Sun, 09 June 2002 12:34 |
|
Re: TA22-3SGTE DYNO UPDATE
|
RA23_Sean | Sun, 09 June 2002 12:49 |
|
Re: TA22-3SGTE DYNO UPDATE
|
TA22-3SGTE | Sun, 09 June 2002 14:05 |
|
Re: TA22-3SGTE DYNO UPDATE
|
| Mon, 10 June 2002 01:35 |
|
Re: TA22-3SGTE DYNO UPDATE
|
Seadog | Mon, 10 June 2002 04:07 |
