Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » 4AGZE Conversion

Show: Today's Posts  :: Show Polls 
Email to friend 
Return to the default flat view Create a new topic Submit Reply
AuthorTopic
Henn
Forums Junkie


Location:
Rosanna, Melb
Registered:
June 2002
Re: 4AGZE Conversion Mon, 28 February 2005 08:11 Go to previous messageGo to previous message
Google it, there are a couple of very good sites that step through the process. Plus there's plenty of good stuff on here.

Basically the four major things you need to do are:
- modify the coolant pipes along the driver's side of the engine so they don't point straight at the firewall
- grind a corner off the lower SC mount so the engine mount can bolt on
- relocate the coil packs from the back of the head
- Turn the intake pipe through 180deg so it points forward
- and maybe a fifth, relocate the alternator so it clears your swaybar.

If you did it mega dodgy and cheap you could just get engine, loom and computer, plumb an EFI pump into your stock fuel pickup, relocate or ditch your intercooler, wire it up and drive away. However all the suggestions above are smart if you value your safety.

Hen
  Send a private message to this user    

SubjectPosterDate
Read Message   4AGZE Conversion imprsvSun, 27 February 2005 11:58
Read Message   Re: 4AGZE Conversion WiLoSun, 27 February 2005 12:06
Read Message   Re: 4AGZE Conversion imprsvSun, 27 February 2005 12:08
Read Message   Re: 4AGZE Conversion NolanSun, 27 February 2005 12:20
Read Message   Re: 4AGZE Conversion boudanSun, 27 February 2005 12:38
Read Message   Re: 4AGZE Conversion imprsvSun, 27 February 2005 12:31
Read Message   Re: 4AGZE Conversion 4agteWed, 02 March 2005 06:20
Read Message   Re: 4AGZE Conversion imprsvSun, 27 February 2005 22:37
Read Message   Re: 4AGZE Conversion inertiaSun, 27 February 2005 23:05
Read Message   Re: 4AGZE Conversion imprsvMon, 28 February 2005 02:46
Read Message   Re: 4AGZE Conversion d-shiznitMon, 28 February 2005 07:29
Read Message   Re: 4AGZE Conversion fatmr2Mon, 28 February 2005 09:53
Read Message   Re: 4AGZE Conversion inertiaMon, 28 February 2005 07:19
Read Message   Re: 4AGZE Conversion  HennMon, 28 February 2005 08:11
Read Message   Re: 4AGZE Conversion imprsvMon, 28 February 2005 09:43
Read Message   Re: 4AGZE Conversion inertiaMon, 28 February 2005 10:51
Read Message   Re: 4AGZE Conversion sonwillMon, 28 February 2005 11:17
Read Message   Re: 4AGZE Conversion drift86levinTue, 01 March 2005 13:26
Read Message   Re: 4AGZE Conversion imprsvTue, 01 March 2005 21:17
Read Message   Re: 4AGZE Conversion drift86levinWed, 02 March 2005 04:36
Read Message   Re: 4AGZE Conversion drift86levinWed, 02 March 2005 04:38
Read Message   Re: 4AGZE Conversion imprsvWed, 02 March 2005 06:16
Previous Topic:T series clutch interchangability
Next Topic:7MGE misfire

Goto Forum:
-=] Back to Top [=-

Current Time: Sun Jul 27 04:19:15 UTC 2025

Total time taken to generate the page: 0.0088481903076172 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.