| Author | Topic |
|---|
I supported Toymods
Location:
NE Melbourne
Registered:
May 2002
|
|
Re: JAP Brake for AE86
|
Mon, 03 June 2002 13:06
|
 |
Yeehah
ABS is like a chain of outlets, they are all over melbourne... but i'll give you the phone number of head office
(03)9687 6831
Fax (03)9396 1442
web www.autobrakeservice.com.au
hope this helps
Cool1
i haven't actually written anything up about my brakes. they are quite similar to what is described in the articles section. i still have more mods to do, but for now they work, and work great at that. i may get around to writing up something soon, although i've done nothing special from what is described in that article...
hmmmm, i can't decide whether to detail it here, or keep the post true to it's orig topic.... ahhh, what the hell, the TA22 isn't much diff in front susp to AE86...
my little additions to what's described int he article are mainly related to the discs... i had the discs sourced through a brake maunfacturer in melbourne and the discs were machined down to 266mm so that they fit the diameter of the pads correctly, while that was done, the discs were slotted and the mounting holes made to fit the corona hubs
i've since fitted the new master cylinder... from here all i paln is braided lines and 200SX pads, something like EBC green stuff... otherwise the standard hilux pads are like 80% and bite hard, so they'll do for now
next is suspension... new shocks (don't like monroe GT gas) and custom springs (current ones are cut just to get it on the road) things will keep happening, i'll post as i do them, but not at least for three weeks till uni exams are over...
|
|
|
