F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 18RG Con Rod Identification Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Steve M Forums Junkie Location: Adelaide Registered: June 2003	Re: 18RG Con Rod Identification Wed, 02 March 2005 02:37 I was just having a look through the 18R series engine manual and it appears that, regardless of the numbers, the square protrusion is present on the 18RG rods (in engine cutaway diagram) but not on the 18R rods. This means that it is likely that the rods my brother has are indeed 18RG rods, while mine might be 18R rods. I looked over the rest of my spare con rods (came out of 18RGEU but may not be original) and the numbers were as follows. 1x 942M with no. 3 bearing cap 2x 943M with no. 2 bearing caps *edited 03/03/05* 1x 942U with no. 1 bearing cap Can anyone describe the features of a set of 18R (C) rods please? Thankyou, Steve M [Updated on: Thu, 03 March 2005 09:52] [Report message to a moderator]

	Subject	Poster	Date
	18RG Con Rod Identification	Steve M	Tue, 01 March 2005 00:15
	Re: 18RG Con Rod Identification	Scootaphill	Tue, 01 March 2005 04:34
	Re: 18RG Con Rod Identification	Steve M	Tue, 01 March 2005 08:42
	Re: 18RG Con Rod Identification	Steve M	Wed, 02 March 2005 02:37
	Re: 18RG Con Rod Identification	barned01	Wed, 02 March 2005 05:54
	Re: 18RG Con Rod Identification	Steve M	Wed, 02 March 2005 14:00
	Re: 18RG Con Rod Identification	jeffro RA28	Thu, 03 March 2005 07:28
	Re: 18RG Con Rod Identification	jeffro RA28	Thu, 03 March 2005 08:09
	Re: 18RG Con Rod Identification	Steve M	Thu, 03 March 2005 10:51
	Re: 18RG Con Rod Identification	Mr DOHC	Mon, 07 March 2005 12:13
	Re: 18RG Con Rod Identification	Steve M	Mon, 07 March 2005 13:53
	Re: 18RG Con Rod Identification	Steve M	Sun, 22 May 2005 02:55

Previous Topic:	1jz Supra stock twin turbos
Next Topic:	Could you actualy work over 4AC to give it some guts ?

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.