| Author | Topic |
|---|
Location:
Adelaide
Registered:
May 2003
|
|
Re: Valve sizing (4A upsize)
|
Thu, 03 March 2005 07:41
 
|
 |
Yeah, i was thinking nitrided valves taken from another car. The 4A 20v nitrided valves were only $15ish each from memory, which is quite reasonable. But they dont make any 16v ones that i found, and not oversize either. 
Wouldnt mind Ti valves, with chromo springs for weight saving, but sadly $$$
|
|
|
| | Subject | Poster | Date |
|---|
 |
Valve sizing (4A upsize)
|
takai | Thu, 03 March 2005 07:01 |
|
Re: Valve sizing (4A upsize)
|
oldcorollas | Thu, 03 March 2005 07:08 |
|
Re: Valve sizing (4A upsize)
|
Bill Sherwood | Thu, 03 March 2005 12:13 |
|
Re: Valve sizing (4A upsize)
|
oldcorollas | Thu, 03 March 2005 12:18 |
|
Re: Valve sizing (4A upsize)
|
takai | Thu, 03 March 2005 07:11 |
|
Re: Valve sizing (4A upsize)
|
IRA11Y | Thu, 03 March 2005 07:31 |
|
Re: Valve sizing (4A upsize)
|
takai | Thu, 03 March 2005 07:41 |
|
Re: Valve sizing (4A upsize)
|
fergo308 | Thu, 03 March 2005 11:21 |
|
Re: Valve sizing (4A upsize)
|
takai | Thu, 03 March 2005 11:54 |
|
Re: Valve sizing (4A upsize)
|
Meat_rack | Thu, 03 March 2005 12:01 |
|
Re: Valve sizing (4A upsize)
|
oldcorollas | Thu, 03 March 2005 12:05 |
|
Re: Valve sizing (4A upsize)
|
takai | Thu, 03 March 2005 12:11 |
|
Re: Valve sizing (4A upsize)
|
fergo308 | Thu, 03 March 2005 12:57 |
|
Re: Valve sizing (4A upsize)
|
takai | Thu, 03 March 2005 13:04 |
|
Re: Valve sizing (4A upsize)
|
oldcorollas | Thu, 03 March 2005 13:18 |
|
Re: Valve sizing (4A upsize)
|
takai | Thu, 03 March 2005 13:22 |
|
Re: Valve sizing (4A upsize)
|
Bill Sherwood | Thu, 03 March 2005 22:46 |
|
Re: Valve sizing (4A upsize)
|
shinybluesteel | Fri, 04 March 2005 07:18 |
|
Re: Valve sizing (4A upsize)
|
Anthony Kellam | Fri, 04 March 2005 09:17 |
|
Re: Valve sizing (4A upsize)
|
FKN16V | Fri, 04 March 2005 22:30 |
|
Re: Valve sizing (4A upsize)
|
ae86drift | Sat, 05 March 2005 04:37 |
