| Author | Topic |
|---|
Location:
Castle Hill, Sydney
Registered:
February 2004
|
|
twin carb cold air intake
|
Thu, 03 March 2005 08:35
|
 |
has anybody successfully made a cold air intake for their twin carb engine?
rather than replacing the air filters with a box and putting a pod down the bottom, i was wondering if this would be as effective...
putting a sheet of stainless steel between carbies and air filter plates, and weld onto it a triangular shaped top bottom and a square front (there isnt much room to play with)
then from the front/bottom of this shield weld on a short bit of pipe, which i attatch flexible pipe to, which leads down to the bottom of the car where i have a sort of funnel mounted for some nice intake.
the way i imagine it this should feed the carbs with some fresh air, but wondering whether it could possibly starve the carbs from air, or any other problems like that.
thanks, jesse
|
|
|
| | Subject | Poster | Date |
|---|
 |
twin carb cold air intake
|
jesseT18 | Thu, 03 March 2005 08:35 |
|
Re: twin carb cold air intake
|
jesseT18 | Thu, 03 March 2005 08:51 |
|
Re: twin carb cold air intake
|
boris | Thu, 03 March 2005 09:31 |
|
Re: twin carb cold air intake
|
jesseT18 | Thu, 03 March 2005 09:35 |
|
Re: twin carb cold air intake
|
boris | Thu, 03 March 2005 09:44 |
|
Re: twin carb cold air intake
|
Mr DOHC | Thu, 03 March 2005 09:46 |
|
Re: twin carb cold air intake
|
greenta22 | Thu, 03 March 2005 09:51 |
|
Re: twin carb cold air intake
|
jesseT18 | Thu, 03 March 2005 09:57 |
|
Re: twin carb cold air intake
|
river | Thu, 03 March 2005 10:01 |
|
Re: twin carb cold air intake
|
jesseT18 | Thu, 03 March 2005 10:30 |
|
Re: twin carb cold air intake
|
river | Thu, 03 March 2005 10:46 |
|
Re: twin carb cold air intake
|
jesseT18 | Thu, 03 March 2005 10:51 |
|
Re: twin carb cold air intake
|
river | Thu, 03 March 2005 11:00 |
|
Re: twin carb cold air intake
|
jesseT18 | Thu, 03 March 2005 11:02 |
|
Re: twin carb cold air intake
|
IRA11Y | Thu, 03 March 2005 21:08 |
