F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » ae86 t50 into ta22, need new hole in the floor? Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
fester Regular Location: Gympie Qld Registered: December 2004	Re: ae86 t50 into ta22, need new hole in the floor? Fri, 04 March 2005 12:32 when you change the rear you are just using the external housing, the shifter and the selector forks (because the length is now different). This will not have any bearing on strength. The strength issue relates to bearings/gears/input,output shafts etc depending on who you listen to. None of these change. The only internal bits you are changing are the selectors that connect teh gear lever to the syncro hubs. Have a look at both boxes, from the rear they are identical apart fromt eh shifter location and the shifter itself. [Report message to a moderator]

	Subject	Poster	Date
	ae86 t50 into ta22, need new hole in the floor?	Ta22lover	Wed, 02 March 2005 17:47
	Re: ae86 t50 into ta22, need new hole in the floor?	fade-e	Wed, 02 March 2005 18:17
	Re: ae86 t50 into ta22, need new hole in the floor?	IRA11Y	Wed, 02 March 2005 21:42
	Re: ae86 t50 into ta22, need new hole in the floor?	Ta22lover	Wed, 02 March 2005 22:01
	Re: ae86 t50 into ta22, need new hole in the floor?	fester	Thu, 03 March 2005 11:40
	Re: ae86 t50 into ta22, need new hole in the floor?	Ta22lover	Thu, 03 March 2005 16:10
	Re: ae86 t50 into ta22, need new hole in the floor?	fester	Fri, 04 March 2005 12:32

Previous Topic:	1G Performance Parts Group Buy
Next Topic:	Removing steering knuckle

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.