Toymods Car Club Inc: Tech & Conversions => 2TG/4AG part 2

Toymods Car Club
www.toymods.org.au

F.A.Q.

Home

Members

Toymods » Tech & Conversions » 2TG/4AG part 2 Show: Today's Posts :: Show Polls Email to friend

Author

Topic

Bill Sherwood
Forums Junkie

Location:
Brisbane / Gold Coast
Registered:
May 2002

Re: 2TG/4AG part 2	Tue, 04 June 2002 00:16

Rod "Also what is the Maximum safe overbore for a 4AGE ?" 82mm for sure, but I know of people that have gone to 83mm and say it's okay. That's using the seven rib block though, and I'd be very, very nervous about going that far. The extra capacity is not worth the potential trouble IMHO. "The 2TG also has a thermostat too ! Don't almost all engines ?? I'm not aware of any that don't !' Where did I say or infer that the 2TG doesn't have a thermostat? "Last thing you need is the pully shifting !" Never seen one move, but now that I think about it that's a minor advantage of the 4AG, as it has much bigger diameter pulleys and so ther leverage is far greater. Just so I can't be miss-quoted, this means that they stand less chance of failing or moving than the 2TG. Teenz "That great Bill - it would be interesting to see the car on the same Dyno as the rest of us." Yep, come on up to the Coast anytime and get them dynoed. "It is not that I doubt the word of the local members, it is just the fact that unless they are really good at measuring hp and kw what they interpret to be may not neccessarily be what actually is. After all, gearbox and diff ratio's plus tyre compounds and overall vehicle weight all impact on a vehicles acceleration." Yep, which is why mine impressed the other two because it's faster than their's is, with all three in mine at the same time. "Bill it is nice to see you got one thing right - then again you did mis-quote one of only two valve sizes." It wasn't a miss-quote, it was a mistake, which I admitted later when corrected. However I'm sure that one of the 2TG series has a larger inlet valve, around the 48mm mark. (88261 head??) "I don not care what you have done or who you raced" You were inferring that I do not show up to any events, which is totally wrong. Say what you mean next time. "I was talking about TOYMODS EVENTS in over two years of attending Toymods events - I have yet to see you at one!" I've been to about the same number of QLD meetings that you have. Works both ways ... I'm also member number 3, actually, so I was in the club well before you were. I think I left Sydney before you even joined. Convid, let it go. It's all water off a duck's back to me. Thanks for the words though. [Report message to a moderator]

[Message index]

-=] Back to Top [=-

Current Time: Fri Nov 15 17:43:29 UTC 2024

Total time taken to generate the page: 0.0073199272155762 seconds

.:: Contact :: Home ::.