| Author | Topic |
|---|
I Supported Toymods
Location:
Sydney
Registered:
December 2002
|
|
Re: ems 8860 serial cable
|
Sun, 06 March 2005 11:12
 
|
 |
| Pheonix wrote on Sun, 06 March 2005 21:11 |
damn, i was hoping some1 would know which wires are crossed, as for it being 2 wires it cant be as its 2 way communication
|
I think Celica_John means that two wires / pins are crossed.
It is possible possible but unlikely that only two wires are used to connect the EMS to the computer.
It is possible for serial communcation to use only two wires (signal and signal ground)... e.g. USB which has only power, power ground, signal and signal ground but I think the computer would shit itself if it had to communicate via the serial port in this manner... this could be corrected by software but then this would be a lot of work to save using a few extra wires.
|
|
|
| | Subject | Poster | Date |
|---|
 |
ems 8860 serial cable
|
Pheonix | Sun, 06 March 2005 02:01 |
|
Re: ems 8860 serial cable
|
sideshow | Sun, 06 March 2005 04:49 |
|
Re: ems 8860 serial cable
|
Pheonix | Sun, 06 March 2005 05:04 |
|
Re: ems 8860 serial cable
|
Siktoy ra23 | Sun, 06 March 2005 06:33 |
|
Re: ems 8860 serial cable
|
Celica_John | Sun, 06 March 2005 07:23 |
|
Re: ems 8860 serial cable
|
Pheonix | Sun, 06 March 2005 10:11 |
|
Re: ems 8860 serial cable
|
Toobs | Sun, 06 March 2005 11:12 |
|
Re: ems 8860 serial cable
|
sideshow | Sun, 06 March 2005 13:35 |
|
Re: ems 8860 serial cable
|
RobertoX | Sun, 06 March 2005 22:54 |
|
Re: ems 8860 serial cable
|
sideshow | Mon, 07 March 2005 10:22 |
|
Re: ems 8860 serial cable
|
Pheonix | Mon, 07 March 2005 02:58 |
|
Re: ems 8860 serial cable
|
RobertoX | Mon, 07 March 2005 03:12 |
|
Re: ems 8860 serial cable
|
Pheonix | Mon, 07 March 2005 15:19 |
|
Re: ems 8860 serial cable
|
sideshow | Mon, 07 March 2005 21:46 |
