| Author | Topic |
|---|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: 3k can it be fuel injected?
|
Tue, 08 March 2005 03:25
|
 |
meh, who knows... it would totally depend on the engine type.
i find the 7KE manifold is not running out of puff at 8000.
both manifolds are 30mm diameter runners all the way from plenum to head. bigports are 30mm and i think this is good for very top end, but smaller ports are better for torque and midrange (ie less than 6000rpm).
the 4KE has a bit of a kink on the rear runners in the alloy section.
the 7KE comes with 50mm TB and 4KE = 40mm. i think 45mm is ideal for a highly strung 1300 (ala suzuki 1300's) but 50mm is not too touchy. 40mm is probably a good place to start.
the 4KE is better as an injector housing if you want to go quad TB's later on.
i was going to try both but i have run out of time. i may try them both when i come back with a slightly detuned motor.
Cya, Stewart
|
|
|
| | Subject | Poster | Date |
|---|
 |
3k can it be fuel injected?
|
kdogg | Sat, 05 March 2005 00:44 |
|
Re: 3k can it be fuel injected?
|
79rollaboy | Sat, 05 March 2005 00:49 |
|
Re: 3k can it be fuel injected?
|
kdogg | Sat, 05 March 2005 01:05 |
|
Re: 3k can it be fuel injected?
|
bmak | Sat, 05 March 2005 02:25 |
|
Re: 3k can it be fuel injected?
|
79rollaboy | Sat, 05 March 2005 04:57 |
|
Re: 3k can it be fuel injected?
|
oldcorollas | Sun, 06 March 2005 05:10 |
|
Re: 3k can it be fuel injected?
|
BlackSupra | Sat, 05 March 2005 01:13 |
|
Re: 3k can it be fuel injected?
|
smitty1 | Mon, 07 March 2005 01:31 |
|
Re: 3k can it be fuel injected?
|
oldcorollas | Mon, 07 March 2005 04:08 |
|
Re: 3k can it be fuel injected?
|
sv_i | Mon, 07 March 2005 10:51 |
|
Re: 3k can it be fuel injected?
|
oldcorollas | Mon, 07 March 2005 11:19 |
|
Re: 3k can it be fuel injected?
|
smitty1 | Tue, 08 March 2005 01:54 |
|
Re: 3k can it be fuel injected?
|
oldcorollas | Tue, 08 March 2005 03:25 |
