Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » need..... more.... camber....

Show: Today's Posts  :: Show Polls 
Email to friend 
Return to the default flat view Create a new topic Submit Reply
AuthorTopic
ae86slaver
Forums Junkie


Registered:
February 2003
Re: need..... more.... camber.... Thu, 10 March 2005 07:12 Go to previous messageGo to previous message
improvedae86 wrote on Thu, 10 March 2005 17:59

Your get the inner tyre edge stuck in Melbourne's tram tracks with those huge amounts of camber Laughing Braking in the wet Laughing Forget it , and the ackermann angle will make the car push on initial corner entry before the camber , added tyre slip angle advantage comes into it element mid corner .

In those pictures you must have used the 60mm longer than ae86 arms , sigma arms ? the ones where the caster arm mount is closer to the inner bush end than a stock ae86 arm therefore reducing the caster angle right ? Whats the lower arm angle ? has the roll center moved higher ? Haven't we covered all this on the ae86 suspension threads before ? Takai where's your link ?



To be quite honest, there is hardly any braking disadvantage due to the camber, if there is, i can't notice it Very Happy

ackerman angle? well, if you're talking about initial corner entry, then i've only noticed a HUGE imrpovement, the dash just stays flat and on an off camber corner it grips inside well.

The sigma arms are the one piece items, 30mm longer than the ae86 arms.

The castor arm mount position is not closer to the inner bush end, if i remember correctly, they are pretty much in the same position, or more outward.

I added 32mm RCA at the same time so it would have corrected the roll centre - the arm is pretty much horizontal on flat ground.

  Send a private message to this user    

SubjectPosterDate
Read Message   need..... more.... camber.... decoyslikecurvesWed, 09 March 2005 17:30
Read Message   Re: need..... more.... camber.... truenosedanWed, 09 March 2005 22:48
Read Message   Re: need..... more.... camber.... Simon-AE86Wed, 09 March 2005 23:13
Read Message   Re: need..... more.... camber.... japlishThu, 10 March 2005 02:27
Read Message   Re: need..... more.... camber.... EVOSTiThu, 10 March 2005 03:55
Read Message   Re: need..... more.... camber.... jesseT18Thu, 10 March 2005 05:49
Read Message   Re: need..... more.... camber.... oldcorollasThu, 10 March 2005 06:43
Read Message   Re: need..... more.... camber.... improvedae86Thu, 10 March 2005 06:59
Read Message   Re: need..... more.... camber....  ae86slaverThu, 10 March 2005 07:12
Read Message   Re: need..... more.... camber.... stylerThu, 10 March 2005 07:03
Read Message   Re: need..... more.... camber.... improvedae86Thu, 10 March 2005 07:43
Read Message   Re: need..... more.... camber.... oldcorollasThu, 10 March 2005 07:59
Read Message   Re: need..... more.... camber.... jesseT18Thu, 10 March 2005 08:04
Read Message   Re: need..... more.... camber.... improvedae86Thu, 10 March 2005 11:12
Read Message   Re: need..... more.... camber.... ArchThu, 10 March 2005 11:25
Previous Topic:1ggte wiring diagram needed asap
Next Topic:4AGZE Conversion Help

Goto Forum:
-=] Back to Top [=-

Current Time: Fri Jul 25 02:14:37 UTC 2025

Total time taken to generate the page: 0.0048391819000244 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.