| Author | Topic |
|---|
I Supported Toymods
Location:
Sydney
Registered:
December 2002
|
|
Re: How to RAISE your 3SGTE from an ST185 GT4
|
Sun, 13 March 2005 01:26
|
 |
| toyrota wrote on Sun, 13 March 2005 10:04 |
step 1, grab yellow pages and find a good workshop
step 2, Deliver car with list of work needed
Step 3, Wait for said time frame, then start ringing every 2nd day for next two months trying to get car back
Step 4, hand over shit load of cash to get car back
Step 5, run in as per instuctions
Step 6, give it all it's got to see how it goes
Step 7, cry about dollars spent for nil result
Step 8, Flame said asshole on every forum you can
Step 9, read this very post as to how to remove engine
Step 10, get the boys around with a few beers to help with the backyard job
Step 11, finish off job after a week and read this post backwards to install engine
step 12, put "spare" (read leftover) nuts and bolts in glovebox just incase you workout where they go
Step 13, do burnout,heli or what ever you can to test and enjoy
Step 14, sometimes the most important post pics of hand with massive cuts,missing fingers,etc showing how you did the job at home cheaper than the first time you sent it out but don't mention the 6 months off work when you couldn't do anything or even drive
Step 15, tell your mate to get f@#ked when he tells you it's still the same.
Hope you all enjoyed this step by step guide, it can be applied to any car but you will have to find the right post from your car's engine removal 
|
haha so true.
PS All spare nuts and bolts must have come from the body of the front cut and are un-needed in this application... you can safely chuck these in your random bits pile so that you can use them if you ever lose a bolt while disassembling the engine next time. 
|
|
|
| | Subject | Poster | Date |
|---|
 |
How to RAISE your 3SGTE from an ST185 GT4
|
Toobs | Sun, 15 August 2004 08:52 |
|
Re: How to RAISE your 3SGTE from an ST185 GT4
|
CLG | Sun, 15 August 2004 09:00 |
|
Re: How to RAISE your 3SGTE from an ST185 GT4
|
wiso | Sun, 15 August 2004 11:17 |
|
Re: How to RAISE your 3SGTE from an ST185 GT4
|
Classique71 | Sun, 15 August 2004 11:30 |
|
Re: How to RAISE your 3SGTE from an ST185 GT4
|
CrAiGzEE | Mon, 16 August 2004 00:40 |
|
Re: How to RAISE your 3SGTE from an ST185 GT4
|
Toobs | Mon, 16 August 2004 01:28 |
|
Re: How to RAISE your 3SGTE from an ST185 GT4
|
charliechalk | Mon, 16 August 2004 02:05 |
|
Re: How to RAISE your 3SGTE from an ST185 GT4
|
Toobs | Mon, 16 August 2004 04:07 |
|
Re: How to RAISE your 3SGTE from an ST185 GT4
|
BlackGT4 | Fri, 11 March 2005 21:52 |
|
Re: How to RAISE your 3SGTE from an ST185 GT4
|
Toobs | Sat, 12 March 2005 13:52 |
|
Re: How to RAISE your 3SGTE from an ST185 GT4
|
toyrota | Sat, 12 March 2005 23:04 |
|
Re: How to RAISE your 3SGTE from an ST185 GT4
|
Toobs | Sun, 13 March 2005 01:26 |
