F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » TA22 3TGTE INFO NEEDED!! Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
YelloRolla Forums Junkie Location: On your mum! Registered: May 2002	Re: TA22 3TGTE INFO NEEDED!! Tue, 15 March 2005 13:11 For my short engine the internals are standard - save for forged pistons, ARP rod bolts and balancing. You have GOT to be careful with assembly and check everything (eg I found that with one popular copper head gasket that the drainage holes for oil return were not lined up). I still run a standard head gasket and have O rings in the cylinder head and it is held together with head studs (I have sets of these available). In order to cope with 9000rpm (not where I would go - although my engines sees 8300 on a regular basis) you could nitride or cryotuff the crank and treat the rods to a linish and shotpeen. Stock valve springs will not cope. Turbo choice and cams to suit will (as with any engine) be critical to how enjoyable the engine is to drive. Steel flywheel if you value you feet.. Intake manifold will hold you up and throttle body will need to be a bit bigger than standard (I am still running stock 50mm T/B atm). Brakes? I use '95 model HiLux calipers and modded Nissan Pintara rotors (it is a big job and wouldn't go onto it here - nor would I handle it that way again). [Report message to a moderator]

	Subject	Poster	Date
	TA22 3TGTE INFO NEEDED!!	BennyG	Mon, 14 March 2005 10:12
	Re: TA22 3TGTE INFO NEEDED!!	BennyG	Mon, 14 March 2005 11:32
	Re: TA22 3TGTE INFO NEEDED!!	fade-e	Mon, 14 March 2005 15:13
	Re: TA22 3TGTE INFO NEEDED!!	bunkyT18	Tue, 15 March 2005 11:30
	Re: TA22 3TGTE INFO NEEDED!!	YelloRolla	Tue, 15 March 2005 12:37
	Re: TA22 3TGTE INFO NEEDED!!	BennyG	Tue, 15 March 2005 12:54
	Re: TA22 3TGTE INFO NEEDED!!	bunkyT18	Tue, 15 March 2005 13:02
	Re: TA22 3TGTE INFO NEEDED!!	TurboRG	Tue, 29 March 2005 23:42
	Re: TA22 3TGTE INFO NEEDED!!	YelloRolla	Tue, 15 March 2005 13:11
	Re: TA22 3TGTE INFO NEEDED!!	BennyG	Wed, 16 March 2005 12:28
	Re: TA22 3TGTE INFO NEEDED!!	fade-e	Wed, 16 March 2005 13:54
	Re: TA22 3TGTE INFO NEEDED!!	YelloRolla	Wed, 16 March 2005 22:58
	Re: TA22 3TGTE INFO NEEDED!!	bunkyT18	Tue, 22 March 2005 06:08
	Re: TA22 3TGTE INFO NEEDED!!	YelloRolla	Tue, 22 March 2005 08:59
	Re: TA22 3TGTE INFO NEEDED!!	EldarO	Tue, 29 March 2005 15:11
	Re: TA22 3TGTE INFO NEEDED!!	EldarO	Wed, 16 March 2005 15:53
	Re: TA22 3TGTE INFO NEEDED!!	fade-e	Tue, 22 March 2005 11:30
	Re: TA22 3TGTE INFO NEEDED!!	sxr01r	Wed, 06 April 2005 03:14

Previous Topic:	Oil sensor question
Next Topic:	Mechanics And Electricians For Engine Conversions(or experienced engine conversanists)

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.