| Author | Topic |
|---|
Location:
Perth
Registered:
September 2002
|
|
Re: replacing a clutch
|
Thu, 28 November 2002 14:15
 
|
 |
heheh, dont forget to drain the oil BEFORE pulling the driveshaft out. hehhe
W50 shifter out is easy, 4 bolts, pull up. done
it may be easier too tilt the motor backwards inorder to get the box out coz of the firewall
do this by undoing all the exhaust mount rings, and u may need to loosen the engine mount bolts a bit, depending on how the engine is weighted
this should make it easier to get the box out on an angle rather than flat.
make sure u allow a whole day for this, coz things can and do go wrong.
disconnect the battery too if u like, coz the starter motor has a habit of shorting out on the block.!!!
thats about it too, munki summed most of it up
Peewee
|
|
|
| | Subject | Poster | Date |
|---|
 |
replacing a clutch
|
munki | Thu, 28 November 2002 08:31 |
|
Re: replacing a clutch
|
BigWorm | Thu, 28 November 2002 09:13 |
|
Re: replacing a clutch
|
Cressida Supra | Thu, 28 November 2002 14:15 |
|
Re: replacing a clutch
|
gianttomato | Thu, 28 November 2002 22:31 |
|
Re: replacing a clutch
|
humble | Thu, 28 November 2002 23:21 |
