| Author | Topic |
|---|
I supported Toymods
Location:
Epping, Sydney
Registered:
May 2002
|
|
Re: Using a Dremel to grind Aluminium
|
Thu, 17 March 2005 23:20
|
 |
so does someone have a dremel and an amalgum burr I can borrow to mount my back seats? (I'm assuming this burr will be ok for widening holes drilled into my seat mounts)? I'm starting off with angle grinder + cutting disc and drilling holes in the area that needs to be removed, but need something to smooth and widen the area.
</hijack>
|
|
|
| | Subject | Poster | Date |
|---|
 |
Using a Dremel to grind Aluminium
|
CrUZsida | Thu, 17 March 2005 03:24 |
|
Re: Using a Dremel to grind Aluminium
|
takai | Thu, 17 March 2005 03:27 |
|
Re: Using a Dremel to grind Aluminium
|
CrUZsida | Thu, 17 March 2005 03:27 |
|
Re: Using a Dremel to grind Aluminium
|
takai | Thu, 17 March 2005 03:28 |
|
Re: Using a Dremel to grind Aluminium
|
CLG | Thu, 17 March 2005 03:28 |
|
Re: Using a Dremel to grind Aluminium
|
CrUZsida | Thu, 17 March 2005 03:29 |
|
Re: Using a Dremel to grind Aluminium
|
takai | Thu, 17 March 2005 03:31 |
|
Re: Using a Dremel to grind Aluminium
|
CrUZsida | Thu, 17 March 2005 03:33 |
|
Re: Using a Dremel to grind Aluminium
|
oldcorollas | Thu, 17 March 2005 03:36 |
|
Re: Using a Dremel to grind Aluminium
|
CrUZsida | Thu, 17 March 2005 03:39 |
|
Re: Using a Dremel to grind Aluminium
|
oldcorollas | Thu, 17 March 2005 03:54 |
|
Re: Using a Dremel to grind Aluminium
|
CrUZsida | Thu, 17 March 2005 03:41 |
|
Re: Using a Dremel to grind Aluminium
|
Allan | Thu, 17 March 2005 04:44 |
|
Re: Using a Dremel to grind Aluminium
|
Skip | Thu, 17 March 2005 04:53 |
|
Re: Using a Dremel to grind Aluminium
|
Sam_Q | Thu, 17 March 2005 05:51 |
|
Re: Using a Dremel to grind Aluminium
|
ed_ma61 | Thu, 17 March 2005 06:18 |
|
Re: Using a Dremel to grind Aluminium
|
CrUZsida | Thu, 17 March 2005 06:30 |
|
Re: Using a Dremel to grind Aluminium
|
gold28 | Thu, 17 March 2005 23:15 |
|
Re: Using a Dremel to grind Aluminium
|
draven | Thu, 17 March 2005 23:20 |
