F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Lengthening control arms Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Turbo_Tim Regular Location: Townsville Registered: February 2005	Re: Lengthening control arms Sun, 20 March 2005 11:59 We used sigma control arms on the T18, worked good. Just had to angle grind down the back of them which rubbed a little and cut down the crush tube and sand down the bushes where it attaches to the chassis. Havent measured the camber, looks good though Wider front track than rear, might be an issue on a road car? If the sigma ones do fit Ta22's, make sure you get one pieces from an early sigma, the later models have bolt on ball joints and are apparently longer. Im sure every wrecker has an abundance of sigma;s, ours did at least. [Report message to a moderator]

	Subject	Poster	Date
	Lengthening control arms	ta2272	Fri, 18 March 2005 03:53
	Re: Lengthening control arms	wilbo666	Fri, 18 March 2005 04:04
	Re: Lengthening control arms	TurboRA28	Fri, 18 March 2005 04:09
	Re: Lengthening control arms	ta2272	Fri, 18 March 2005 05:03
	Re: Lengthening control arms	TurboRA28	Fri, 18 March 2005 05:38
	Re: Lengthening control arms	ta2272	Fri, 18 March 2005 11:51
	Re: Lengthening control arms	EVOSTi	Sat, 19 March 2005 02:35
	Re: Lengthening control arms	ta2272	Sat, 19 March 2005 03:23
	Re: Lengthening control arms	EVOSTi	Sun, 20 March 2005 08:13
	Re: Lengthening control arms	YelloRolla	Sun, 20 March 2005 09:34
	Re: Lengthening control arms	ta2272	Sun, 20 March 2005 11:35
	Re: Lengthening control arms	Turbo_Tim	Sun, 20 March 2005 11:59

Previous Topic:	1jz power outputs
Next Topic:	ST162 problem

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.