| Author | Topic |
|---|
I supported Toymods
Location:
I renounced punctuation
Registered:
May 2002
|
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
Thu, 24 March 2005 00:59
 
|
 |
| wilbo666 wrote on Thu, 24 March 2005 11:52 |
....(most 80's onwards ones are the same  )
|
There are some famous last words if ever I heard any. 
I'd drill and tap for an MA61 slave (you can buy them new from Repco for about $35). I suspect the throw out fork is likely to be a Hilux one. I modified my pivot ball to take the pressed steel fork but it really wasn't ideal. I'll be getting another made so that I can run the 2JZGE-W58 fork.
Need pics of conversion now.
|
|
|
| | Subject | Poster | Date |
|---|
 |
Dellow JZ -> W5X Alloy bellhousing
|
wilbo666 | Wed, 23 March 2005 12:54 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
gianttomato | Wed, 23 March 2005 13:50 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
wilbo666 | Wed, 23 March 2005 14:09 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
gianttomato | Wed, 23 March 2005 22:51 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
81LOWLUX | Wed, 23 March 2005 23:07 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
Skip | Wed, 23 March 2005 23:51 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
Allan | Thu, 24 March 2005 00:28 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
wilbo666 | Thu, 24 March 2005 00:52 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
gianttomato | Thu, 24 March 2005 00:59 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
wilbo666 | Thu, 24 March 2005 01:23 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
BlackSupra | Thu, 24 March 2005 05:50 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
mrshin | Thu, 24 March 2005 14:19 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
wilbo666 | Fri, 25 March 2005 00:34 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
gianttomato | Fri, 25 March 2005 00:59 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
wilbo666 | Fri, 25 March 2005 03:06 |
