| Author | Topic |
|---|
Club President
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
|
Re: 1ggte (gen3) into ta23
|
Mon, 02 December 2002 03:47
 
|
 |
Oz Craig,
Mate Tina's 1GGTE RA28 is now up and running  (Not finished but Running )
First of all I may be interested in the old 13T if your dumping it. I am getting low on spare T series engines lol. Only if its complete tho.
Ok now to the bits your interested in. You can use the TA23 xmember no worries you just need to get a Front sump version of the 1GG not a mid sump. The front Sump with wings is the best sump design they made and fits beautifully over the TA23 xmember. (And yes its the yellow injector grey ECY plug version)You do need to make new mounts and we used TA22 rubbers. The engine side of the mounts we used passenger side TA22 and drivers side 1GGTE water to air steel mount I have a few pics I can send.
In Tina's we used the factory W55 and a 3TGTE flywheel (couldn't find a 1GG one  . (I have a spare 1GGTE bellhousing if you get stuck BTW)
Tailshaft is a 1 piece item from a TA22 Auto and fits perfectly (bloody thing was for my car now I have to find another one )
Shifter hole sits a little further back but is in a better position IMHO.
Speedo cable is KE70, Washer Bottle and braket is KE30, Radiator is GA70, Accel Peddle is god knows what withthe top haly off a RA60 ?? Top radiator hose is Mitsubishi Magna bottom hose (thanks for the tip Phil ) Overflow bottle is TA22, clutch line is a PITA and the list goes on !
But dawn its a good fit nice and low and along way back Still sorting the finer details but should be finished before new years and should be at the Dyno day for sure !
|
|
|
| | Subject | Poster | Date |
|---|
 |
1ggte (gen3) into ta23
|
CrAiGzEE | Thu, 28 November 2002 13:20 |
|
Re: 1ggte (gen3) into ta23
|
Norbie | Thu, 28 November 2002 23:36 |
|
Re: 1ggte (gen3) into ta23
|
CrAiGzEE | Thu, 28 November 2002 23:45 |
|
Re: 1ggte (gen3) into ta23
|
gianttomato | Thu, 28 November 2002 23:49 |
|
Re: 1ggte (gen3) into ta23
|
CrAiGzEE | Thu, 28 November 2002 23:55 |
|
Re: 1ggte (gen3) into ta23
|
THE WITZL | Fri, 29 November 2002 01:03 |
|
Re: 1ggte (gen3) into ta23
|
Norbie | Fri, 29 November 2002 01:53 |
|
Re: 1ggte (gen3) into ta23
|
CrAiGzEE | Fri, 29 November 2002 02:06 |
|
Re: 1ggte (gen3) into ta23
|
Norbie | Fri, 29 November 2002 03:47 |
|
Re: 1ggte (gen3) into ta23
|
CrAiGzEE | Fri, 29 November 2002 03:57 |
|
Re: 1ggte (gen3) into ta23
|
Norbie | Fri, 29 November 2002 05:32 |
|
Re: 1ggte (gen3) into ta23
|
ddeane | Sat, 30 November 2002 06:39 |
|
Re: 1ggte (gen3) into ta23
|
BigWorm | Sat, 30 November 2002 07:01 |
|
Re: 1ggte (gen3) into ta23
|
CrAiGzEE | Sat, 30 November 2002 13:04 |
|
Re: 1ggte (gen3) into ta23
|
Norbie | Sun, 01 December 2002 06:54 |
|
Re: 1ggte (gen3) into ta23
|
CrAiGzEE | Sun, 01 December 2002 13:15 |
|
Re: 1ggte (gen3) into ta23
|
St3ve_AE92 | Sun, 01 December 2002 22:35 |
|
Re: 1ggte (gen3) into ta23
|
Norbie | Mon, 02 December 2002 00:35 |
|
Re: 1ggte (gen3) into ta23
|
CrAiGzEE | Mon, 02 December 2002 03:09 |
|
Re: 1ggte (gen3) into ta23
|
gianttomato | Mon, 02 December 2002 03:23 |
|
Re: 1ggte (gen3) into ta23
|
CrAiGzEE | Mon, 02 December 2002 03:36 |
|
Re: 1ggte (gen3) into ta23
|
thetoyman75 | Mon, 02 December 2002 03:47 |
|
Re: 1ggte (gen3) into ta23
|
CrAiGzEE | Mon, 02 December 2002 03:53 |
|
Re: 1ggte (gen3) into ta23
|
punkdefender | Fri, 14 February 2003 20:49 |
