| Author | Topic |
|---|
I supported Toymods
Location:
I renounced punctuation
Registered:
May 2002
|
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
Fri, 25 March 2005 00:59
 
|
 |
It'll be fine.
That said, seeing as you plan on running a 2JZGE clutch, I would go to the trouble of ordering a JZA80 2JZGE-W58 clutch fork (and pivot ball if it's available) and fitting that to the bellhousing. It will save you aa tonne of grief.
The Daikin clutch kits come with the thrust bearing on it own carrier and the holding clip. Having it setup to take generic parts right from the start is the possible outcome.
|
|
|
| | Subject | Poster | Date |
|---|
 |
Dellow JZ -> W5X Alloy bellhousing
|
wilbo666 | Wed, 23 March 2005 12:54 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
gianttomato | Wed, 23 March 2005 13:50 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
wilbo666 | Wed, 23 March 2005 14:09 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
gianttomato | Wed, 23 March 2005 22:51 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
81LOWLUX | Wed, 23 March 2005 23:07 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
Skip | Wed, 23 March 2005 23:51 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
Allan | Thu, 24 March 2005 00:28 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
wilbo666 | Thu, 24 March 2005 00:52 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
gianttomato | Thu, 24 March 2005 00:59 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
wilbo666 | Thu, 24 March 2005 01:23 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
BlackSupra | Thu, 24 March 2005 05:50 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
mrshin | Thu, 24 March 2005 14:19 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
wilbo666 | Fri, 25 March 2005 00:34 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
gianttomato | Fri, 25 March 2005 00:59 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
wilbo666 | Fri, 25 March 2005 03:06 |
