Author | Topic |

Club Member
Location: sydney
Registered: May 2002
|
Re: Targa Tas Tech Regs Suspension Q's.
|
Sat, 26 March 2005 03:04

|
 |
ok ill have a stab at the first one at least, I dont know that itll be correct but here goes..
Quote: | "The spring seats may be adjustable if the adjustable structural part is a part of the spring seat and is separated from the original suspension parts/bodywork (it may be removed).
|
I would say that its stating that you can run a coil over IF it is attached to the original seating point, i.e the same as what IP class does and similar to how my rear suspension set up is , with the sleve welded to the original spring seat but still allowing adjustment.
Im not sure if that also allows front coil fitment but im guessing that if you are able to fit the sleeve and maintain the original perch then it could be concluded to meet the requirements.
As far as a camber adjuster goes i dont think that reg. would mean that you can run them, the case bieng that a camber adjuster is NOT a spring seating point.
Quote: | "A silent block may be replaced by a 'uniball' joint, but only on the condition that the shock absorber has no guiding function (for example, as in a MacPerson strut).
|
hmm this one is not so clear to me, but id say you are correct in assuming this is referring to RCA's
|
|
|