Toymods Car Club Inc: Tech & Conversions => 2 bolt master cylinder + 4 spots

Toymods Car Club
www.toymods.org.au

Toymods » Tech & Conversions » 2 bolt master cylinder + 4 spots Show: Today's Posts :: Show Polls Email to friend

Author

Topic

thetoyman75
Forums Junkie

Club President
I supported Toymods

Location:
Sydney
Registered:
May 2002

Re: 2 bolt master cylinder + 4 spots	Tue, 04 June 2002 12:25

Dorikon, Mate my coilovers feel great but I need a smaller spring for clearance issues with the front tyres. The struts are just XT130 Struts and the standard Spring platform has been welded to a threaded base. The threaded section of the strut is just like any other Coil over. The ride is great as the springs were custom wound to the weight of the old engine. Not sure how they will go with the boat anchor in place ? My Suspension was done by Fulcrum in QLD. I couldn't recommend them any higher based on the ride. I didn't deal with them myself tho so can't comment on there service. As for pedal feel it has me buggered too !! Jamie Heritage (with the V8 TA22) swapped his "New" T-18 master for a Tercel unit I had spare and was also happier with the pedal feel. I honestly don't know why tho ! Not Sure how Yogi finds it I know he had some hassels with bleeding his system but forgot to see how it finished up ? Jamie is a Victorian too so if you see a red celica type blur and he stops somewhere ask him what he thinks. He has a Wild front brake set up tho. Makes mine sound like a stock set up !! GTR skyline Calipers and 300mm rotors from memory but I could be wrong on that. They definatly dwarf mine tho. Stops great !! [Report message to a moderator]

Current Time: Fri Jan 31 10:04:08 UTC 2025

Total time taken to generate the page: 0.0054659843444824 seconds

.:: Contact :: Home ::.