Toymods Car Club Inc: Engines, Accessories and other Mechanicals => assorted performance bits

Toymods Car Club
www.toymods.org.au

F.A.Q.

Home

Members

Classifieds » Engines, Accessories and other Mechanicals » assorted performance bits Show: Today's Posts :: Show Polls Email to friend

Author

Topic

JustenGT4
Forums Junkie

Location:
Canberra
Registered:
June 2003

Re: assorted performance bits

Wed, 30 March 2005 00:00

Yup the Holley Red is a low pressure high volume pump for performance carbie applications. You would generally run a fuel reg (i have the Malpassi for sale as well) to fine tune your fuel supply but depending on the carbs you are using you can get away without one. Here are the specs

Flows 97 GPH (free flow).
Flows 71 GPH at 4 PSI.
Maximum pressure is 7 PSI.
Regulator is not required.
Motor draws only 2 Amps current.
7-1/2 Amp fuse recommended.
Provides constant fuel flow with no pulsation.
Has externally accessible pressure relief valve (max. 7 PSI).
Rotor/Vane pump design is more tolerant of contaminated fuels.
Weighs only 2.88 lbs.
Repair kits are readily available.
Can be serviced from either pump end or brush cap end.

Attachment: holley red.jpg
(Size: 13.00KB, Downloaded 17 time(s))

[Report message to a moderator]

[Message index]

-=] Back to Top [=-

Current Time: Mon Jul 21 20:48:50 UTC 2025

Total time taken to generate the page: 0.0042269229888916 seconds

.:: Contact :: Home ::.